Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
An aftermarket cab enclosure kit that closes in an open Case skid steer with a formed 1/2-inch Lexan polycarbonate front door, locking hardware, seals and mounting parts. It comes as Door Only or Door + Side Windows, and the side panels are stationary polycarbonate, not sliding. The kit is built for owners of older open-cab 410-465 machines who want weather and debris protection without a factory cab. Fit depends on matching both the series and the model, so the machine's decal and existing hinge, sensor and wiring layout matter.
In stockReturn policy
This is a Pro-Series cab enclosure for open-cab Case skid steers, covering models 410 through 465. It closes in the front of the cab with a formed 1/2-inch Lexan polycarbonate door. The kit includes locking hardware, seals and the parts needed for an aftermarket retrofit.
The door comes with a locking exterior handle and keys, an interior pull, hinges, a latch, a striker, thresholds, a perimeter seal, fasteners and related mounting parts. The Door + Side Windows option adds stationary polycarbonate side panels with their seals and mounting hardware. The side panels bolt into place and do not slide or open.
The kit is for an open cab. It is not a replacement panel for intact OEM door hardware. Existing factory or aftermarket framing may need to be removed. Installation requires locating and drilling hinge holes, and may require extra holes for the thresholds and striker. The specified drill and tap are supplied. Dry-fit the door, align the hinges and adjust the striker before final tightening. The latch should close without twisting the panel, and the seal should contact the opening evenly.