It checks today's price at every store, compares the alternatives and answers in about a minute.
Casting Epoxy Lite is a two-part epoxy resin from Nerpa Polymers built for small pours up to one inch thick. It mixes to a low viscosity so air bubbles release easily, and its two-stage UV protection plus UV-transparent components slow yellowing in sunlight. A bio-based formula, including a bioglycerol viscosity reducer, and an accelerator-free cure set it apart from conventional casting resins. It suits hobbyists and small-shop makers casting thin blanks, small molds and quick projects rather than deep, thick pours.
In stockShips from Canada · duties may applyReturn policy
Rated 4.8 out of 5 from 23 ratings. Buyers rate it highly, though the small sample means feedback is limited.
Casting Epoxy Lite is an epoxy resin system for small casting projects from 0.25 in to 1 in thick. It mixes at 2:1 by volume or 2.27:1 by weight. When mixed, it is a clear, low-viscosity liquid.
The mixed viscosity is 360–400 cP, which helps with air release during curing. For a 1.0 in thick 2 L pour, the working time is 60 minutes, the pot life is 4 hours, and it sets to touch in 20 hours. It is ready for sanding in 24 to 48 hours, depending on ambient conditions and layer thickness.
Curing takes 24 to 48 hours depending on total volume, project shape and ambient conditions. Two-stage UV protection and components that do not absorb UV light help shield it from rapid yellowing in sunlight. The resin has at least 38% bio-based content and a 100% bioglycerol-based viscosity reducer, and the cure is accelerator-free.