- What is 10/2 NM-B wire used for?
- It feeds 30-amp, 240-volt branch circuits, most often electric dryers, water heaters, ranges and small subpanels. It is for dry indoor locations, not burial or wet areas.
- Does 10/2 NM-B include a ground wire?
- Yes. The cable has two insulated 10 AWG conductors plus a bare copper ground, so it provides a complete circuit with equipment grounding.
- Can I use 10/2 NM-B for a 30-amp circuit?
- Yes. The 10 AWG copper conductors and 90°C rating support a 30-amp branch circuit, which is the usual use for this cable.
- Is 10/2 NM-B the same as 10/3?
- No. 10/2 has two insulated conductors plus ground; 10/3 adds a third insulated conductor for circuits that need two switched or two hot legs plus neutral, such as some dryer and range setups.
- Can 10/2 NM-B be buried or run outdoors?
- No. NM-B is for dry, protected indoor locations. Underground feeders need UF cable or conduit, and outdoor runs need wet-rated wiring.
- How much wire does a 250 ft coil cover?
- It gives 250 feet of cable, enough for a long branch run with extra for routing and terminations. Plan the route and add slack before cutting.
- Where is the Cerrowire 10/2 NM-B Wire with Ground (250 ft. Coil) cheapest?
- At Amazon, for $143.99, 89% under what the other stores charge, as of our latest check.
- Where can I buy the Cerrowire 10/2 NM-B Wire with Ground (250 ft. Coil)?
- 8 stores we checked sell it, including Codale, Echo Electric, World Electric, NorthEast Electrical, QED Electric.