

The CIGMAN CLD-100 is a handheld laser receiver that picks up red or green pulsed laser beams where the line itself is hard to see, up to about 165 ft in poor light. It shows the beam position on three sides (front, side and back) so you don't have to turn the unit to read it, and it adds beeps plus LEDs to speed up finding the plane. Two bubble vials help you hold it level. It only works with line lasers that have a pulse mode, including CIGMAN's CM-701, CM-720, CM-801, CM-S and CM-G16 lines, and it will not work with rotary lasers. Buyers rate it highly; the main caution is that it is useless on a laser without pulse mode.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
Owners rate the CLD-100 4.7 out of 5 across 77 ratings and describe it as a reliable helper for seeing the beam at distance and in bright light. The recurring caveat is compatibility: it does nothing unless the laser has pulse mode on.
The CIGMAN CLD-100 is a laser receiver for line laser levels that have a Pulse Mode function. It does not work with rotary laser levels. The laser level's pulse mode must be turned on when it is used with the receiver.
It detects red and green pulsed laser beams in poor lighting at distances up to 165 ft (50 m). Displays on the front, side and back make the readout visible without turning the receiver. Dual-sided bubble vials on the front and top help determine level. Sound and LED visual signals help locate the laser plane, and a beep sounds when the target is found.
It comes with a 9V battery that provides about 70 working hours. The receiver shuts off automatically after about 10 minutes of being idle. An attached heavy-duty clamp mounts it to a rod or other target point.