This CleanFreak heated carpet extractor cleans with hot water extraction. Hot water is driven into the carpet fibers at high pressure to break up dirt, soil and grime. A vacuum removes the water and the loosened dirt at the same time. It is the step up from the 120 PSI heated model.
It includes an adjustable glide drag wand that recovers 30% more water than a regular carpet wand. The 2-piece wand has a button lock that lets it come apart for storage and transport. A drying fan is not required, but it can help finish the job.
Two 750 watt heaters bring the water to a maximum of 210° F. The unit must be powered from outlets on 2 separate circuit breakers. A built-in circuit locator tells you when you are on 2 separate circuits: press its button while plugged into 2 outlets, and if the light turns on, it is okay to start. Do not use extension cords unless they are a heavier gauge than the cords attached to the unit, as a regular extension cord could overheat and create a fire risk.
- Tank capacity
- 11 gallons
- Pressure
- Adjustable pump, 0 to 500 PSI
- Heaters
- Two 750 watt heaters
- Max water temp
- 210° F
- Power
- 2 separate circuit breakers required
- Wand
- Adjustable glide drag wand, 2-piece with button lock
- Dumping
- Side dump valve and back dump hose
- Service access
- Remove 2 bolts and tilt the tanks back to reach the pump, motors and heaters
- Weight
- 95 pounds