This is a basic non-heated carpet cleaning machine with a 120 PSI pump. It comes with a single jet 12-inch drag wand for cleaning carpets and rugs. The design is simple, with no extra features, and all mechanical components are easy to reach for regular maintenance.
The body is rotationally molded polyethylene. The tanks hold 11 gallons of clean solution and 13 gallons of recovered solution. Using a defoamer when recovering solution knocks down foam and helps protect the vacuum motors. To empty the recovered solution, disconnect the drain hose from the rear of the machine.
Two 2-stage vacuum motors have separate switches on the back. Use both for large areas of carpet and one for rugs and mats, where maximum suction isn't needed. Keep moisture away from the motors. The 25-foot power cord and 25-foot vacuum hose give a 50-foot cleaning radius from an outlet. The 2-piece wand separates at a button lock for storage and transport.
- Type
- Non-heated carpet extractor
- Pump pressure
- 120 PSI
- Clean solution tank
- 11 gallons
- Recovery tank
- 13 gallons
- Tank material
- Rotationally molded polyethylene
- Vacuum motors
- Two 2-stage motors, each with its own switch
- Power
- 120 V AC, 12 amps under normal load
- Power cord
- 25 ft
- Vacuum hose
- 25 ft
- Cleaning radius
- 50 ft from an outlet
- Wand
- 12-inch single jet drag wand, cast aluminum head, handle grip
- Wand design
- 2-piece, separates at a button lock
- Wheels
- 10-inch non-marking rear wheels, 3-inch non-marking casters
- Handle
- Molded handle with cord storage
- Drain
- Drain hose disconnects from the rear of the machine