What saws does this blade fit?

It is a 10-inch blade with a 5/8-inch bore, which fits most radial arm, miter and stationary table saws. Check your saw's arbor size and maximum blade diameter before mounting.

Is a 24-tooth blade good for fine finish?

24 teeth favor fast ripping and crosscutting in solid wood and plywood. For trim, veneer or laminates, a higher tooth count gives a smoother edge.

Can the blade be resharpened?

Yes. The carbide teeth are designed to be resharpened when the edge dulls, which extends the blade's life.

What is the kerf and why does it matter?

The kerf is 0.13 inch, narrower than a standard blade. A narrow kerf removes less material and asks less of the saw's motor.

Does it cut plywood without splintering?

CMT rates it for plywood and says the tooth geometry limits splintering. A zero-clearance insert or scoring pass helps on tear-out-prone veneers.

CMT USA 201.024.10 ITK Industrial 10 Inch 24 Tooth Fine Finish Saw Blade

Best price now

$50.95at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

CMT USA 201.024.10 ITK Industrial 10 Inch 24 Tooth Fine Finish Saw Blade

Best price now

$50.95at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $50.95 at Walmart on Nov 10.

Our take on the CMT USA 201.024.10 ITK Industrial 10 Inch 24 Tooth Fine Finish Saw Blade

The CMT USA ITK 201.024.10 is a 10-inch, 24-tooth carbide-tipped circular saw blade with a 5/8-inch bore, built for ripping and crosscutting softwood, hardwood and plywood. Its 24-tooth geometry and narrow 0.13-inch kerf aim at fast, clean cuts with less splintering, and the blade is designed to be resharpened when it dulls. It fits most radial arm, miter and stationary table saws. Against general-purpose 40-tooth blades it trades a rougher finish for faster feed and less load on the saw; against thin-kerf ripping blades it is a sturdier, resharpenable option.

Best forRipping and crosscutting solid wood on a table sawFinish carpenters and cabinet makersContractors cutting plywood and sheet goodsOwners of miter, radial arm or stationary table saws

Pros

24-tooth geometry cuts fast in softwood, hardwood and plywood
Narrow 0.13-inch kerf reduces load on the saw
Chrome-coated carbide teeth can be resharpened
Micro-balancing aims to cut vibration and noise
Fits most 10-inch saws with a 5/8-inch bore

Cons

24 teeth leave a coarser finish than high-tooth finish blades
Not intended for laminates, melamine or non-ferrous metal
Thin kerf can flex if fed too hard
Resharpening adds a maintenance step

CMT USA 201.024.10 ITK Industrial 10 Inch 24 Tooth Fine Finish Saw Blade prices at every store

WalmartNew
In stockSold by HeltonTool & HomeReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$50.95+ $6.49 shippingChecked Nov 10
Visit Walmart

About the CMT USA 201.024.10 ITK Industrial 10 Inch 24 Tooth Fine Finish Saw Blade

This is a 10-inch circular saw blade with 24 teeth and a 5/8-inch (0.63-inch) bore. It is made for fine finish cuts in softwood, hardwood, and plywood. It can be used for crosscutting or ripping.

The blade is made from chrome-coated carbide steel. It runs cool and cuts without splintering or chipping. Micro-balancing technology reduces vibration and noise for smoother, quieter operation.

The narrow 0.13-inch kerf takes less effort to cut through wood. The blade fits most radial arm, miter, and stationary table saws. The teeth can be resharpened when the edge dulls.

Diameter: 10 inches
Teeth: 24
Bore: 5/8 inch (0.63 inch)
Kerf: 0.13 inch, narrow
Material: Chrome-coated carbide steel
Color: Silver
Cuts: Crosscutting and ripping
Works on: Softwood, hardwood, plywood
Compatibility: Most radial arm, miter, and stationary table saws
Maintenance: Teeth can be resharpened

Specifications

color: SilverSource
size: 10-Inch x 24 Teeth with 5/8-Inch BoreSource

Questions and answers

What saws does this blade fit?: It is a 10-inch blade with a 5/8-inch bore, which fits most radial arm, miter and stationary table saws. Check your saw's arbor size and maximum blade diameter before mounting.
Is a 24-tooth blade good for fine finish?: 24 teeth favor fast ripping and crosscutting in solid wood and plywood. For trim, veneer or laminates, a higher tooth count gives a smoother edge.
Can the blade be resharpened?: Yes. The carbide teeth are designed to be resharpened when the edge dulls, which extends the blade's life.
What is the kerf and why does it matter?: The kerf is 0.13 inch, narrower than a standard blade. A narrow kerf removes less material and asks less of the saw's motor.
Does it cut plywood without splintering?: CMT rates it for plywood and says the tooth geometry limits splintering. A zero-clearance insert or scoring pass helps on tear-out-prone veneers.
Where is the CMT USA 201.024.10 ITK Industrial 10 Inch 24 Tooth Fine Finish Saw Blade cheapest?: At Walmart, for $50.95, as of our latest check.