This is a solar-powered outdoor security light with a motion sensor and bright LED beads. It charges from sunlight, so no wiring is needed. The case is made of ABS+PC and is rated IP55 for use in rain and other weather.
The light senses motion up to 8 m (26 ft) away across a 160-degree range. It has 3 lighting modes. In sensor mode, it turns on bright when it detects people and goes out 20 seconds after they leave. In induction plus low-light mode, it turns on bright when it detects people and drops to 25% brightness 20 seconds after they leave. In the third mode, it stays on at low brightness in the dark.
To install, drive 2 screws into the wall and hang the light on them. It should be placed where it gets sunlight, such as a front door, backyard, porch, patio or garage wall.
- Color
- White
- Material
- ABS plastic (ABS+PC case)
- Dimensions
- 9 x 16.5 x 12 cm (3.54 x 6.49 x 4.72 in)
- Weight
- 255 g (0.56 lb)
- Power
- Solar charging
- Control
- Light control and motion induction
- Sensing distance
- 8 m (26 ft)
- Sensing angle
- 160 degrees
- Lighting modes
- 3, selected by button or remote
- Water resistance
- IP55
- Working temperature
- 10-60°C (14-140°F)
- Installation
- Wall mount with 2 screws, no wiring
- In the box
- 1 x solar light