This is a 1.75mm PLA filament loaded with real copper powder, made by Protoplant under the Protopasta line. Prints run like ordinary PLA but come off the bed looking like terracotta, then sand and polish to a penny-bright shine or oxidize to an aged patina. The HTPLA base can be heat treated to hold shape up to about 175°C, and parts feel noticeably heavier than plain PLA. It suits makers chasing a metal look and heat resistance, not anyone who needs strong, tough parts: owners call it brittle and fussy about settings.
Availability unknown
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Store links may earn us a commission.
Lowest price we've seen: $12.00 on Nov 13 at Proto-pasta. Tracked across 2 stores since Nov 13.
Buyers rate it highly for the copper look and the finishing process, which many find easy and rewarding. They also warn it is weak and brittle and needs serious tuning, and some lost long prints to warping during heat treating.
This is a copper-filled HTPLA filament for 3D printing. It is made from heat treatable PLA mixed with real copper powder, with a particle size under 250 micron (0.25 mm). It prints like plastic and finishes like real metal on most standard 3D printers.
The finish is up to you. Prints can be polished to a bright, mirror-like copper shine, or left to develop a rustic patina like aged copper. A clear water-based coating such as Mod Podge preserves the finish.
The filament is flow optimized and takes up less moisture than standard PLAs. It is not electrically conductive, but it is noticeably heavier than plain PLA and transfers heat better. Heat treating lets printed parts hold their shape up to near melting (175°C).
It checks today's price at every store, compares the alternatives and answers in about a minute.