Does it work with Viega ProPress fittings?

Yes. It is stated to be compatible with Viega ProPress, Nibco, Elkhart and other standard copper pipe fittings. Confirm the jaw size matches the fitting before pressing.

What pipe sizes does it press?

It presses 1/2", 3/4" and 1" copper tubing. The sliding mechanism also cuts tubing with an outer diameter of 1/8" to 1-1/4".

Can I use it with a power tool instead of by hand?

The tool adapts to both manual wrenches and electric sockets. That lets you press by hand in tight spaces or use a socket driver on longer runs.

Does it replace soldering and brazing?

Yes. It is designed to create press connections instead of slow brazing and soldering. The joint relies on the fitting's O-ring and a full, square press.

Is it a powered crimper?

No. It is a manual two-handed press tool. Expect to apply hand force to each joint rather than pulling a battery trigger.

The listing describes one press tool with rubberized grips. Jaws and fittings are not listed, so check that the jaws you need for 1/2", 3/4" and 1" are included or on hand.

Copper Pipe Press Tool Dual-Drive Crimper for 1/2", 3/4" and 1" Fittings

Best price now

$250.46at WalmartChecked Nov 5

Prices are checked against each store and labelled with when.

Visit Walmart

Copper Pipe Press Tool Dual-Drive Crimper for 1/2", 3/4" and 1" Fittings

Best price now

$250.46at WalmartChecked Nov 5

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $250.46 at Walmart on Nov 5.

Our take on the Copper Pipe Press Tool Dual-Drive Crimper for 1/2", 3/4" and 1" Fittings

This is a two-handed press tool for making crimped connections on 1/2", 3/4" and 1" copper tubing, replacing brazing and soldering with a mechanical press. It has rubberized slip-proof grips, a balanced two-hand layout, and a sliding mechanism that also cuts tubing from 1/8" to 1-1/4" outer diameter. It works with Viega ProPress, Nibco, Elkhart and other standard copper fittings, and can be driven by hand wrench or electric socket. It suits plumbers and remodelers who want solder-free joints in tight spaces or on repetitive runs, though it is a manual press rather than a battery-powered crimper, so each joint takes hand force.

Best forPlumbers making solder-free copper jointsRepair and remodel work in tight spacesContractors running repeated press connectionsOwners of Viega ProPress, Nibco or Elkhart fittings

Pros

Covers three common fitting sizes: 1/2", 3/4" and 1"
Replaces brazing and soldering with a press connection
Rubberized grips and balanced two-hand design
Works with hand wrench or electric socket
Sliding mechanism also cuts tubing from 1/8" to 1-1/4" OD
Compatible with Viega ProPress, Nibco and Elkhart fittings

Cons

Manual press needs hand force on every joint
No battery or hydraulic assist for large runs
Jaw and fitting compatibility must be checked per brand
Not a substitute for a powered crimper on high-volume work

Copper Pipe Press Tool Dual-Drive Crimper for 1/2", 3/4" and 1" Fittings prices at every store

WalmartNew
Availability unknown
$250.46Checked Nov 5
Visit Walmart

Copper Pipe Press Tool Dual-Drive Crimper for 1/2", 3/4" and 1" Fittings price history

Lowest price we've seen: $250.46 on Nov 5 at Walmart. Tracked across 1 store since Nov 5.

About the Copper Pipe Press Tool Dual-Drive Crimper for 1/2", 3/4" and 1" Fittings

This copper pipe press tool makes press connections on 1/2", 3/4" and 1" copper tubing.

Tool type: Dual-drive copper pipe press tool (crimper)
Press sizes: 1/2", 3/4" and 1" copper tubing
System type: Copper fitting/coupling system
Count: 1

Specifications

Pipe Fitting U0026 Coupler Type: Copper Fitting/Coupling System
Count: 1

Questions and answers

Does it work with Viega ProPress fittings?: Yes. It is stated to be compatible with Viega ProPress, Nibco, Elkhart and other standard copper pipe fittings. Confirm the jaw size matches the fitting before pressing.
What pipe sizes does it press?: It presses 1/2", 3/4" and 1" copper tubing. The sliding mechanism also cuts tubing with an outer diameter of 1/8" to 1-1/4".
Can I use it with a power tool instead of by hand?: The tool adapts to both manual wrenches and electric sockets. That lets you press by hand in tight spaces or use a socket driver on longer runs.
Does it replace soldering and brazing?: Yes. It is designed to create press connections instead of slow brazing and soldering. The joint relies on the fitting's O-ring and a full, square press.
Is it a powered crimper?: No. It is a manual two-handed press tool. Expect to apply hand force to each joint rather than pulling a battery trigger.
What is in the box?: The listing describes one press tool with rubberized grips. Jaws and fittings are not listed, so check that the jaws you need for 1/2", 3/4" and 1" are included or on hand.
Where is the Copper Pipe Press Tool Dual-Drive Crimper for 1/2", 3/4" and 1" Fittings cheapest?: At Walmart, for $250.46, as of our latest check.

Stores we've priced the Copper Pipe Press Tool Dual-Drive Crimper for 1/2", 3/4" and 1" Fittings at

Walmart deals and prices

More pipe crimping tools

Stores we've priced the Copper Pipe Press Tool Dual-Drive Crimper for 1/2", 3/4" and 1" Fittings at

Walmart deals and prices

More pipe crimping tools

Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2, 3/4, 1 Inch Jaws

Propress Copper Pipe Crimper Hydraulic Press Tool 1/2", 3/4" and 1"

Hydraulic Copper Pipe Crimping Tool with 1/2", 3/4", and 1 Inch Jaws

Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2", 3/4", 1" Jaws

Hydraulic Copper Pipe Crimping Tool with 1/2", 3/4" and 1" Jaws