
CPU Air Cooler with 6x6mm Heat Pipes, Dual 120mm Fans, Universal Socket Compatibility for AM5/AM4/LGA 1851/1700
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
This is a dual-tower CPU air cooler with six 6mm heat pipes, direct heat pipe contact and two 120mm fans. The fans top out at 1650rpm, move 68.2CFM and are rated under 26dB(A), so it aims at quiet cooling rather than raw airflow. It fits a very wide range of Intel and AMD sockets, including AM5, AM4, LGA 1700 and LGA 1851, and the fans are mounted so the cooler can go on without pulling the motherboard or RAM. Against single-tower coolers it offers more heatsink surface and a second fan; against big premium dual-towers it gives up some peak thermal headroom. It suits mid-to-high-end builds where low noise matters more than extreme overclocking.
In stockSold by santong yinReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
This CPU air cooler has a dual-tower design with six 6mm heat pipes. The heat pipes make direct contact with the processor over a 30mm area, which helps keep temperatures consistent under heavy workloads.
Two 120mm fans run at up to 1650rpm and move 68.2CFM of air. Noise stays below 26dB(A). The fans connect through a 4-pin power port and work with standard 12V motherboard setups.
The fan setup does not need to be taken apart to install, so the cooler can go in without removing the motherboard or RAM. It leaves clearance for tall memory modules so they do not block the slots.







