The Creality Ender-3 V3 SE is a 3D printer with a 220 x 220 x 250 mm build volume. It prints at speeds up to 250 mm/s while keeping print quality, and a 3.2-inch display shows the interface. The frame measures 13.74 inches wide, 14.33 inches deep and 19.3 inches high, and it comes partly assembled.
Leveling is automatic: a CR Touch probe works with a strain sensor to set the Z offset, so the first layer goes down without manual adjustment. The "Sprite" direct extruder feeds PLA, PETG and TPU, and one tap loads or unloads filament for changes. The Y-axis runs on steel linear shafts, and the two Z-axis screws are synced by a timing belt.
Files are transferred on a microSD card and the printer connects by USB-C; there is no wireless or Ethernet connection. It reads .3mf, .amf, .obj and .stl files and takes spool filament with a 1.75 mm diameter, extruded through a 0.4 mm nozzle.
- Printer Type
- 3D printer
- Build Volume
- 220 x 220 x 250 mm
- Nozzle Diameter
- 0.4 mm
- Filament Diameter
- 1.75 mm
- Layer Thickness
- 0.35 micrometers
- Max Print Speed
- 250 mm/s
- Filaments
- PLA, PETG, TPU
- Filament Type
- Spool
- Leveling
- Automatic, CR Touch with strain sensor auto Z offset
- Extruder
- "Sprite" direct extruder
- Filament Loading
- One-tap automatic load and unload
- Y-Axis
- Steel linear shafts