Creality K1 Max 3D Printer, 600mm/s High Speed, Smart AI Camera & LiDAR, CoreXY, 300℃ Printing, Large 11.81x11.81x11.81 in Build
Where to buy
No store is showing a current price right now. The stores below sell it; ask the agent to check today's prices.
Prices are checked against each store and labelled with when.
Check today's price at WalmartAsk our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.
Our take on the Creality K1 Max 3D Printer, 600mm/s High Speed, Smart AI Camera & LiDAR, CoreXY, 300℃ Printing, Large 11.81x11.81x11.81 in Build
The Creality K1 Max is a large-format, enclosed CoreXY 3D printer with a 300x300x300 mm build volume. It targets high speed: up to 600 mm/s with 20,000 mm/s² acceleration, a 60W ceramic hotend reaching 300°C, and dual-gear extrusion. A 1μm LiDAR scans the first layer and an AI camera watches for failures, with WiFi and Ethernet for remote monitoring. It competes with other fast enclosed printers like the Bambu Lab P1S and X1 Carbon, offering a bigger build volume and lidar at a lower tier, though reviewers note print quality needs tuning and the camera is basic.
- Large 300x300x300 mm build volume
- Very fast: 600 mm/s and 20,000 mm/s² acceleration
- Fully enclosed CoreXY frame
- LiDAR first-layer scan and AI failure camera
- Hotend reaches 300°C for ABS and other engineering filaments
Creality K1 Max 3D Printer, 600mm/s High Speed, Smart AI Camera & LiDAR, CoreXY, 300℃ Printing, Large 11.81x11.81x11.81 in Build prices at every store
- WalmartNew
Out of stockSold by ComgrowReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$719.00Free shippingChecked 8 h ago
What reviewers say
Owners praise the K1 Max for its speed and large enclosed build volume at its tier. Many report good results after tuning, while some cite first-layer and print-quality issues and a weak camera.
- SpeedPraisedOwners say it prints much faster than older bed-slinger printers.
- Build volumePraisedThe 300 mm cube lets users print large parts in one piece.
- Print qualityMixedResults are good after tuning, but some report rough first layers or artifacts.
Questions and answers
- How big is the build volume?
- 300 x 300 x 300 mm (about 11.81 inches per side). That fits large single-piece prints that most bed-slinger printers cannot.
- What filaments can it print?
- The 300°C hotend handles PLA, PETG, ABS, TPU and similar materials. The enclosure helps with ABS and other warp-prone filaments.
- Does it level the bed automatically?
- Yes. It has automatic bed leveling, and the LiDAR scans the first layer to check it.
- Can I monitor prints remotely?
- Yes. WiFi and Ethernet let you watch the AI camera and check status from the Creality app or a browser.
- How does it compare with the K1?
- The K1 Max has a larger 300 mm cube build volume, an AI camera and LiDAR, while the standard K1 is smaller.
- What is in the box?
- The printer, a spool holder, tools and a starter filament sample. Check the listing for the exact included accessories.
