Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Creality Falcon 2 22W is a desktop diode laser engraver and cutter built around a 22W module that combines four 6W diodes with FAC spot compression. Creality rates it to cut 15mm basswood, 10mm dark acrylic and 0.1mm thin metal sheet, and to engrave at up to 25,000mm/min. It adds an integrated air assist with a manual knob and LightBurn control, color marking on metal, offline use and a triple monitoring system. It suits makers who want one machine for wood, acrylic and light metal work; compared with 10W diode machines it cuts faster and thicker stock, but it is still a diode laser, not a CO2 cutter, and needs eye protection and ventilation.
In stockReturn policy
Also available at
The Creality Falcon 2 is a 22W laser engraver and cutter. Its FAC spot compression technology combines four 6W laser diodes to reach 22W. The laser is Class IIIa with 120000mW output power. It can cut 15mm basswood, 10mm dark acrylic and 0.1mm thin metal sheet.
Engraving speed is up to 25000mm/min. Cutting speed is 200% higher and engraving speed 100% higher than the Creality 10W engraver. It can create hundreds of colors on metal surfaces. It supports offline creation and dynamic preview, so it can be used without a computer. Assembly typically takes 10 to 20 minutes.
An integrated air assist blows away smoke and dust during engraving and helps protect the laser head lens. It can be adjusted manually with a knob or through LightBurn software. A triple monitoring system tracks airflow, flame and lens condition. It reminds the user of the airflow size, stops the machine immediately if a flame is detected, and sounds an alarm when the lens is dirty.
