Prices are checked against each store and labelled with when. Store links may earn us a commission. As an Amazon Associate, Deal.ai earns from qualifying purchases.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Creality Falcon2 Pro S is a 22W desktop diode laser cutter and engraver built into a fire-resistant metal enclosure. It is a certified Class 1 machine, so the laser is shielded during normal use, and it stops automatically when the enclosure door is opened or the bottom drawer is pulled out. The 22W head cuts 12mm wood and 10mm dark opaque acrylic in one pass, with a spot that focuses down to about 0.06 x 0.08mm for fine detail. A built-in camera maps designs onto the workpiece and supports batch runs through LightBurn, and air assist and auto focus cut the setup fiddling. It suits makers and small shops moving up from open-frame lasers; the trade-off is a heavier, enclosed unit that costs more than bare 20W diode frames and still cannot match a CO2 laser on clear acrylic or thick stock.
Availability unknown
As an Amazon Associate, Deal.ai earns from qualifying purchases.
Also available at
Store links may earn us a commission.
Lowest price we've seen: $849.00 on Nov 12 at Amazon. Tracked across 1 store since Nov 12.
Owners of the Falcon2 Pro line praise the enclosed Class 1 build and the strong 22W cutting, and the camera and auto focus are seen as real time-savers. Common complaints center on the reliance on LightBurn for camera features and the machine's size and weight.
The Creality Falcon2 Pro S is a 22W desktop diode laser cutter and engraver. It is a certified Class 1 laser machine with a fire-resistant metal enclosure. It stops automatically when the enclosure is opened or the bottom drawer is removed.
The machine cuts 12mm wood and 10mm dark opaque acrylic in a single pass. Its cutting speed is over 600mm/s, and the laser focuses down to 0.06 x 0.08mm for fine detail. An intelligent focusing system sets focus automatically, so no manual focusing is needed.
A built-in high-resolution camera lets you see the work and scans drawings without separate design software. It extracts patterns from the surface of the object being worked on. Batch engraving and cutting with the camera requires a connection to LightBurn. The machine works with Falcon Design Space software and LightBurn, and gives access to over 300 materials and 1,000 editable ready-to-make projects.
