Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The Creality Falcon2 Pro S is a desktop diode laser cutter and engraver with a switchable 40W/22W head. Turbo mode cuts thick wood, acrylic and leather fast; Precision mode narrows the beam for fine engraving. It ships as a Class 1 enclosed machine with a fire-resistant metal housing, a built-in honeycomb bed, auto-focus and a lid and drawer interlock that stops the laser when either is opened. That enclosure and dual power set it apart from open-frame 20W to 40W diode lasers, which usually need a separate shield and honeycomb bed. It suits makers and small shops cutting 20mm wood or dark acrylic in one pass, and buyers who want safety built in rather than added on.
In stockShips from the UK · duties may applyReturn policy
The Creality Falcon2 Pro S is an enclosed desktop diode laser cutter and engraver. It has an auto-focus laser module and a built-in honeycomb bed. It switches between two power modes: 22W Precise Mode for delicate engraving and 40W Turbo Mode for cutting thicker materials such as wood, acrylic and leather.
The 40W machine can cut 20mm wood and 20mm dark opaque acrylic in a single pass. Cutting speed exceeds 600 mm/s, and the laser focuses down to 0.06 x 0.08 mm for fine detail. The intelligent focusing system removes the need for manual focus.
It is a certified Class 1 laser machine with a fire-resistant metal enclosure. It stops automatically when the enclosure is opened or the bottom drawer is removed. An exhaust system works with the enclosure to filter and vent smoke and dust and to reduce noise, so protective glasses are not needed during operation.
