

This is a three-gallon two-part epoxy kit: 1.5 gallons of resin and 1.5 gallons of hardener, mixed 1:1 by volume, with pumps included and a manual. It is built for deep-pour and coating work where clarity matters: a UV-resistant formula that resists yellowing, a high-gloss glass-like finish, anti-foaming agents to cut bubble time, and low viscosity with low odor. The large volume and pump setup suit repeat makers, table and countertop coaters, and flower preservation, while casual hobbyists may find three gallons more than they can use before it ages. Against smaller craft kits it trades convenience for bulk and measurement accuracy; against premium casting brands it competes on clarity and bubble control rather than on a named pro-grade track record.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
Rated 4.9 out of 5 across 779 ratings, buyers largely report clear, hard, glossy results and few bubbles. The pump-and-ratio setup draws frequent praise for being beginner-friendly. Complaints are limited and tend to center on cold-weather behavior and the sheer volume for light users.
This is a two-part clear epoxy resin kit with a 1:1 volume mixing ratio. Included pumps help measure the resin and hardener accurately and keep mixing neat. The kit comes with 1.5 gallons of resin, 1.5 gallons of hardener and a manual.
The formula is UV resistant and cures to a high-gloss, glass-like, scratch-resistant and moisture-resistant finish that does not yellow. It contains anti-foaming agents, so bubbles disperse quickly. It can be used for flower preservation.
Viscosity is 1400 CPS, which makes it easy to mix and pour. It has low odor, and its heat release is not high enough to damage molds. It cures to a hardness of 75D. Work in a well-ventilated space. In cold weather, preheat the resin and hardener before use. Read the manual before starting to avoid problems such as the resin not curing.