The CTEK D250SE is a DC-to-DC charger for a dual battery system with a starter battery and a service or auxiliary battery. It charges the service battery while the vehicle is running, so the auxiliary battery can be used without access to a mains power supply.
It charges 12 V lead-acid and lithium batteries from 40 to 300 Ah at 20 A, fully automatically and with temperature compensation. Lead-acid and lithium modes are selected on the unit, and it works with both normal and smart alternators. It has two inputs, an alternator and a solar panel, which can be used one at a time or in parallel, and the solar input uses a Maximum Power Point Tracking regulator. Charging follows a 5-step program.
Screw terminals connect the inputs and outputs. The charger is built for permanent on-board installation and can be mounted in the vehicle. It is rated IP65 and operates at ambient temperatures from -20 °C to +50 °C (-4 °F to +122 °F).
- Input
- 11.5–23 V, 25 A
- Output
- 14.4/14.7 V at 20 A for lead-acid; 14.2 V for LiFePO₄
- Battery voltage
- 12 V
- Battery types
- WET, MF, Ca/Ca, AGM, EFB, GEL, LiFePO₄
- Battery capacity
- 40–300 Ah
- Charging
- 20 A, fully automatic, temperature-compensated
- Charging program
- 5-step
- Inputs
- Alternator, solar panel, or both in parallel
- Solar
- Regulator with Maximum Power Point Tracking (MPPT)
- Alternators
- Normal and smart
- Terminals
- Screw terminals