These slat wall panels are made of solid wood with a smooth Dark Chestnut veneer finish. The finish is a deep reddish-brown. The panels come pre-finished, so they need no staining, sealing or other finishing.
The vertical slat design connects panel to panel with no visible joint lines. Each slat is 5 3/4" wide and 3/4" thick. Each box holds 3 panels plus an end cap panel for finishing the edge.
The panels can be installed horizontally or vertically on any wall surface and are attached with construction adhesive. They can be cut to fit with standard woodworking tools. The wall should be clean, dry and flat before installation. They are made for indoor walls in homes and commercial spaces.
- Material
- Solid wood with smooth Dark Chestnut veneer finish
- Finish
- Dark Chestnut, pre-finished deep reddish-brown
- Panel length
- 94"
- Panel width
- 5 3/4"
- Panel thickness
- 3/4"
- In the box
- 3 panels and 1 end cap (94" × 0.8")
- Coverage per box
- 12 sq ft
- Box weight
- 17 lbs
- Water resistance
- Water-resistant
- Application
- Indoor walls, residential and commercial
- Installation
- Construction adhesive (Liquid Nails or similar); horizontal or vertical
- Coverage guide
- 50 sq ft ≈ 5 boxes; 100 sq ft ≈ 10 boxes; 200 sq ft ≈ 19 boxes; 300 sq ft ≈ 28 boxes. Add 10% for cuts and waste