Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
A two-part epoxy resin kit built for thick pours, rated for up to 4 inches in a single pour. It mixes at a simple 2:1 volume ratio and cures crystal clear with anti-yellowing stabilizers, aimed at river tables, bar tops and large castings. The slow, low-exothermic formula and low viscosity are designed to release bubbles and self-level without extra work. It suits makers doing deep, clear casts; for thin pours under 2 inches a faster-curing resin is the better match.
In stockShips from the UK · duties may applyReturn policy
Buyers rate it highly, with a 5 out of 5 average across 22 ratings. Praise centers on clear, bubble-light results in deep pours and the easy 2:1 mix.
This is a deep pour epoxy resin kit for river tables, bar tops, casting and resin art. It pours up to 4 inches deep in a single pass. For pours under 2 inches, the same brand offers a separate 2 Inch Deep Pour & Casting resin with a faster cure time.
The formula has an ultra-low shrinkage rate, so the cured piece stays flat and does not warp. A slow exothermic reaction and low viscosity leave a nearly bubble-free result in deep pours. Added stabilizers resist yellowing.
Resin and hardener mix at a 2:1 volume ratio. The low viscosity lets the resin self-level to a smooth, glossy surface. It cures crystal clear to a hardness of 85.
