The Delta 37-071 is a benchtop jointer with a 6-inch cutting width and a 12 A universal motor spinning a two-knife aluminum cutterhead at 10,000 RPM. Cast-iron tables and a heavy cast-iron fence give it more mass than the aluminum-bed benchtop jointers it competes with. It suits hobbyists and small shops that need to flatten and square boards up to 6 inches wide without floor space for a full-size jointer. The quick-change knife system and jackscrew depth adjustment make blade changes easier than on older two-knife machines, though the straight steel knives leave a finish that helical-head rivals improve on.
In stock
In stock
Availability unknown
Also available at
Lowest price we've seen: $399.00 on Nov 20 at Lowe's. Tracked across 3 stores since Nov 20.
Owners rate it around 4 out of 5 and generally like the cast-iron build and cut quality for the size. Complaints center on knife setup and the finish on difficult grain.
The Delta 37-071 is a benchtop jointer with a 6 in. cutting width and a maximum depth of cut of 1/8 in. Its tables and base are cast iron, and the fence is cast iron on a heavy-duty support system.
The tables measure 6 1/4 in. deep by 28 1/2 in. wide, and the fence measures 4 5/16 in. deep by 22 7/8 in. wide, with positive stops at 90° and 45°, in and out. Power comes from a corded 12 A, 120 V, single-phase, 60 Hz universal motor. A dust collection port is built in, with a chip chute opening of 2 1/4 in. ID and 2 3/8 in. OD.
It checks today's price at every store, compares the alternatives and answers in about a minute.