
Dewalt 1/2 VSR Pistol Grip Hammerdrill Kit
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
The DeWalt 1/2 in VSR Pistol Grip Hammerdrill Kit is a corded two-mode drill with a 10 amp motor, a keyed 1/2 in chuck and a metal gearcase. A mode collar switches between straight drilling and hammer drilling, and the two speed ranges top out at 1,200 and 3,500 rpm with up to 56,000 blows per minute. It drills 7/16 in in concrete, 1/2 in in steel and 1-1/2 in in wood, which puts it in the same class as other corded 1/2 in hammerdrills but with a keyed chuck rather than a keyless one. It suits homeowners and trades who want corded power for masonry anchors and mixed drilling, and it is heavier and tethered compared with compact cordless hammerdrills.
In stockSold by DDOTReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
Owners of DeWalt corded hammerdrills generally rate the power and build highly, calling them reliable for masonry and mixed drilling. The common complaints are weight and the keyed chuck, which some find slower than keyless designs.
The Dewalt 1/2 VSR Pistol Grip Hammerdrill Kit is a corded hammer drill with a 1/2-inch keyed chuck and a pistol grip. It runs on 120V AC at 10.0 amps. It has two speed settings, with no-load speeds of 1 to 1,200 RPM and 0 to 3,500 RPM, and up to 56,000 blows per minute. A mode collar selects hammerdrill or drill, and the drill reverses.
The housing is metal, and the gearcase is metal. The handle has a soft grip. The drill has a 1/2-inch capacity in steel, 1-1/2-inch capacity in wood, and 7/16-inch capacity in concrete. It is 14 inches long and weighs 6 pounds.
The kit includes a 360-degree locking side handle, a chuck key with holder, a steel depth rod, a kit box, and the bare tool. The cord is 8 ft long. The tool is yellow.
It checks today's price at every store, compares the alternatives and answers in about a minute.












