Can it cut large-format tile on the diagonal?

Yes. The cantilevering cart gives 18 in. on the diagonal and 24 in. ripping capacity, enough for most large-format floor tile.

Does it cut porcelain and natural stone?

Yes. The 1.5 HP motor and 3-1/8 in. depth of cut are rated for hard materials including porcelain and stone, and for most V-cap.

Can one person set it up?

Yes. It weighs 69 lbs. and the frame measures 34 x 26 in., so one person can transport, set up and store it.

Does it make angled cuts?

Yes. An integrated 45/22.5° miter feature handles quick angled cuts, and the plunge feature makes cutouts for outlets and registers.

What comes in the box?

The saw and a 5 Gal. water pan. The blade and pump are part of the saw as sold.

How does it compare with a 7 in. wet saw?

It cuts larger tile and harder material than a 7 in. saw, but it is heavier and costs more. A 7 in. saw is easier to carry for small jobs.

Where is the DEWALT 10 in. Wet Tile Saw cheapest?

At Amazon, for $999.00, as of our latest check.

Where can I buy the DEWALT 10 in. Wet Tile Saw?

2 stores we checked sell it, including Amazon, Arbor.

DEWALT 10 in. Wet Tile Saw

Best price now

$999.00at AmazonChecked Nov 12

Prices are checked against each store and labelled with when. Store links may earn us a commission. As an Amazon Associate, Deal.ai earns from qualifying purchases.

Visit Amazon

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $999.00 at Amazon on Nov 12.

What reviewers say

Owners rate the D24000 highly for clean, accurate cuts on large porcelain and stone and for its water control. Complaints center on weight, the water tray, and the cost of the saw and replacement parts.

What people mention

Cut accuracyPraisedOwners say the integrated rails keep cuts straight and chip-free on large tile.
Motor powerPraisedReviewers report the 1.5 HP motor holds speed through porcelain and stone.
Water controlMixedThe adjustable nozzles limit mist, but owners say the tray and runoff still need watching.
WeightCriticisedSome owners find 69 lbs. hard to carry up stairs despite the one-person setup.
CostCriticisedBuyers say the saw and replacement parts cost more than entry-level wet saws.

About the DEWALT 10 in. Wet Tile Saw

The DEWALT D24000 is a 10 in. wet tile saw with a 1.5 HP motor. It cuts hard materials such as porcelain and stone, as well as ceramic and pavers. The 3-1/8 in. depth of cut handles most V-cap and pavers.

A cantilevering rail and cart system gives a 24 in. ripping capacity and cuts 18 in. tile on the diagonal. The stainless steel rail system is integrated into the saw frame for accurate cuts. The cutting cart removes for easy cleaning. The saw has a built-in 45/22.5° miter feature for angled cuts. A plunge feature makes cuts for electrical outlets and A/C registers. The edge guide has a 2-position 45° setting for lining up corner cuts.

Dual water nozzles adjust to put water where it is needed on the blade and minimize over-spray and mist. Rear and side water attachments help contain run-off and blade spray. The 5 gal. water pan speeds up set-up and break-down. The saw weighs 69 lbs., so one person can transport and set it up. Its compact frame (34 in. x 26 in.) fits in a vehicle for transport and storage.

Tool type

Corded wet tile saw, bench portability

Motor

1.5 HP, 15 amps, 120 V

Max speed

4,200 rpm

Blade

10 in. diamond blade, 0.060 in. thick

Depth of cut

3-1/8 in.

Rip capacity

24 in.