The DCK2050M2 combo kit pairs the DCD805 20V MAX XR brushless 1/2-inch hammer drill driver with the DCF850 ATOMIC 20V MAX brushless 3-speed 1/4-inch impact driver. Both tools run on the 20V MAX battery platform. Each has a compact, lightweight design for working in tight spaces.
The hammer drill driver has a high-speed transmission, a variable-speed trigger and two speed settings (0-650 and 0-2,000 rpm). Its 1/2-inch metal ratcheting chuck gives high bit retention. The adjustable LED has 3 positions and 3 modes, with up to 70 lumens. The spotlight mode shuts off after 20 minutes. The tool is 7 inches long, 1/2 inch shorter than the DCD796 (tool head only). A chip pocket accepts the Tool Connect chip DCE042, which works with the Tool Connect Site Manager app. The chip is sold separately.
The impact driver has a brushless motor that delivers 1,825 in-lb of torque and 3,250 rpm for driving large-diameter screws. It has a variable 3-speed trigger and an integrated 3-LED work light. The design is under 4 inches long.
- Model
- DCK2050M2
- Brand
- DeWalt
- Voltage
- 20V MAX
- Battery capacity
- 4.0Ah (2 DCB204 battery packs)
- Hammer drill driver
- DCD805, brushless, 1/2 in. metal ratcheting chuck
- Drill speeds
- 2 settings: 0-650 rpm and 0-2,000 rpm
- Drill work light
- Adjustable 3-position, 3-mode LED, up to 70 lumens, 20-minute spotlight shutoff
- Drill length
- 7 in.
- Impact driver
- DCF850 ATOMIC, brushless, 3-speed, 1/4 in.
- Impact driver output
- 1,825 in-lb of torque, 3,250 rpm
- Impact driver light
- Integrated 3-LED work light
- Impact driver length
- Under 4 in.
- Tool Connect
- Chip pocket on drill/driver accepts DCE042 chip (sold separately)
- In the box
- 1 DCD805B hammer drill driver, 1 DCF850B impact driver, 2 DCB204 20V MAX 4.0Ah battery packs, 1 DCB115 12V/20V MAX battery charger, 1 kit bag