Is the DCD800 a hammer drill?

No. It is a two-speed drill/driver with a 15-position clutch and no hammer function. For masonry you need a separate SDS or hammer drill.

How much torque do the two tools have?

The DCD800 drill is rated at 90 Nm and the DCF850 impact driver at 205 Nm. The impact driver has three electronic speed and torque settings.

What batteries does the kit use?

Two 18V XR 5.0Ah batteries, charged with the included DCB1104 charger. They fit the wider DeWalt 18V XR range.

What bit holder does the DCF850 have?

A 1/4-inch (6.35 mm) hex chuck with self-locking for quick bit changes. It takes standard 1/4-inch hex bits.

Is this kit worth it over a brushed combo?

The brushless motors give more power, longer runtime and shorter bodies than brushed DeWalt combos. If you drill and fasten regularly, the step up is worthwhile; occasional light users can spend less.

The DCD800 drill/driver, the DCF850 impact driver, two 5.0Ah batteries, a DCB1104 charger and a TSTAK case.

Dewalt dck2051p2t-qw | xr brushless twin kit 18v in tstak met dcd800 en dcf850 (2x 5.0ah accu + dcb1104 lader) - dck2051p2t-qw

Q: Where is the Dewalt dck2051p2t-qw | xr brushless twin kit 18v in tstak met dcd800 en dcf850 (2x 5.0ah accu + dcb1104 lader) - dck2051p2t-qw cheapest?

At Fietsweb.nl, for $505.28, as of our latest check.

Q: Where can I buy the Dewalt dck2051p2t-qw | xr brushless twin kit 18v in tstak met dcd800 en dcf850 (2x 5.0ah accu + dcb1104 lader) - dck2051p2t-qw?

3 stores we checked sell it, including Fietsenwinkel.be, Tormino, Fietsweb.nl.

Best price now

$505.28at Fietsweb.nlChecked Nov 12

Compared across 3 stores. Prices are checked against each store and labelled with when.

Visit Fietsweb.nl

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

What reviewers say

Owners of the DCD800 and DCF850 rate both tools highly for power in a compact body, and the twin kit is popular with people standardizing on DeWalt 18V. Complaints center on the kit's bulk and the lack of a hammer mode on the drill.

What people mention

PowerPraisedOwners say both tools drive large screws and bore holes without bogging down.
SizePraisedThe short bodies, especially the DCF850, get into tight spots that older tools cannot.
Battery lifePraisedThe 5.0Ah packs are reported to last through long work sessions across both tools.
WeightMixedLight for their class, but the full kit and case are heavy to carry around.
Hammer modeCriticisedBuyers note the DCD800 is drill/driver only, so masonry work needs a separate hammer tool.
ChargerCriticisedSome find the included charger slow and basic compared with multi-port fast chargers.

About the Dewalt dck2051p2t-qw | xr brushless twin kit 18v in tstak met dcd800 en dcf850 (2x 5.0ah accu + dcb1104 lader) - dck2051p2t-qw

This twin kit pairs the DeWalt DCD800 drill driver with the DCF850 impact driver. Both are 18V XR brushless tools. The kit includes two 5.0 Ah batteries, a charger and a TSTAK case.

The DCD800 has a brushless motor that delivers up to 90 Nm of torque. It has an all-metal 2-speed transmission and a 15-position adjustable clutch. A pivoting LED light with 3 positions lights the work area. Compared with the previous battery generation, it offers up to 50% more power, and it is 25% more compact and lighter.

The DCF850 is a compact 3-speed cordless impact driver with a brushless motor and up to 205 Nm of torque. Speed and maximum torque can be set electronically in 3 levels. The impact housing is aluminum to help dissipate heat. The 1/4 inch hex chuck locks automatically for quick bit changes. It has rubber grips and a three-part LED light.

Kit

DeWalt DCK2051P2T-QW twin kit

Tools

DCD800 drill driver, DCF850 impact driver

Voltage

18 V

Motor

Brushless

DCD800 torque

Max. 90 Nm

DCD800 speed

0-2000 rpm no-load