It checks today's price at every store, compares the alternatives and answers in about a minute.
The DW618B3 is a three-base router kit built around a 12-amp, 2-1/4 HP variable-speed motor that runs from 8,000 to 24,000 rpm with electronic feedback and soft start. You get a fixed base, a plunge base and a D-handle base, plus 1/4-inch and 1/2-inch collets, so one motor covers table work, freehand plunging and trigger-controlled routing. The micro-fine depth ring adjusts in 1/64-inch steps, and the tool-free cam lock makes base swaps quick. It suits furniture and cabinet makers who want one motor across several setups; it is heavier and bulkier than a trim router, and the three-base kit costs more than a single-base router of the same power.
In stockReturn policy
Owners rate it highly, praising the smooth, quiet-running motor and the convenience of swapping between the three bases. Most complaints center on weight and the learning curve for the depth adjustment.
The DeWalt DW618B3 is a three-base router kit. It includes the DW618M motor pack, the DW6184 mixed base, the DW6182 plunge base and the DW6183 D-handle base, along with 1/4-inch and 1/2-inch collets. The detachable cordset lets the same motor pack run in all three bases.
The 12.0 Amp motor is rated at 2-1/4 HP maximum and runs from 8,000 to 24,000 rpm. Electronic variable speed with feedback control holds speed under load, and soft start reduces start-up torque. The D-handle base has a trigger switch with lock-on. A micro-fine depth adjustment ring moves in 1/64-inch increments.
The plunge base has a 2-1/2-inch stroke and a five-position turret stop for stepped or repeated cuts. Dust collection runs through the column and collects 95% of the dust. The base and motor housing are die-cast aluminum, and the clear LEXAN sub-base accepts standard template guide bushings.





