What widths can this dado set cut?

Stacking the two outer blades and the chippers gives grooves from roughly 1/4 in. to 13/16 in. wide. Odd widths between chipper sizes need shims.

Will it fit my table saw?

It mounts on a standard 5/8 in. arbor, which covers most 8 in. and 10 in. table saws. Check your saw's arbor length and dado capacity first.

Does it cut flat-bottomed grooves?

Yes. The stacked chippers produce flat-bottomed dadoes and rabbets, not the rounded grooves a router bit leaves.

Can it cut plywood without chipping?

It handles plywood, but some owners report tear-out on veneered faces. A backing board or scoring pass helps.

No. The set does not include shims, so plan on buying a shim set for widths between chipper sizes.

Is it worth it over a premium dado set?

For occasional joinery it covers the common widths at a lower cost. Premium sets add more teeth, shims and finer finish for demanding work.

What do buyers say about the Diablo 8 in. Dia. X 5/8 in. Carbide Stacked Dado Saw Blade Set?

Rated 3.8 out of 5 from 4 ratings.

Diablo 8 in. Dia. X 5/8 in. Carbide Stacked Dado Saw Blade Set

Best price now

$113.76at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

Diablo 8 in. Dia. X 5/8 in. Carbide Stacked Dado Saw Blade Set

Best price now

$113.76at WalmartChecked Nov 9

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $113.76 at Walmart on Nov 9.

Our take on the Diablo 8 in. Dia. X 5/8 in. Carbide Stacked Dado Saw Blade Set

This is a stacked dado set for table saws: two outer blades plus chipper plates that stack on a 5/8 in. arbor to cut flat-bottomed grooves and dadoes from about 1/4 in. up to 13/16 in. wide. Diablo's carbide teeth and red Perma-SHIELD coating are built for clean, flat cuts in hardwood, softwood and plywood. It suits furniture and cabinet builders who cut joinery on a table saw. Against premium dado sets it is a mid-priced option with fewer teeth and no shims included, so very fine width tuning takes extra care.

Best forCabinet and furniture makers cutting dadoes and rabbetsTable saw owners building shelving and caseworkWoodworkers who want flat-bottomed grooves in plywood

Pros

Cuts flat-bottomed grooves from about 1/4 in. to 13/16 in. wide
Carbide teeth hold an edge well in hardwood and plywood
Anti-kickback tooth design on the outer blades
Coating resists pitch and corrosion
Fits standard 5/8 in. table saw arbors

Cons

No shims included, so odd widths need extra shims
Fewer teeth than premium dado sets, so cuts are less polished
Thin kerf means some sleds and inserts need adjusting
Chippers must be kept in order and matched in pairs

Diablo 8 in. Dia. X 5/8 in. Carbide Stacked Dado Saw Blade Set prices at every store

WalmartNew
In stockSold by The Factory DepotReturns: Sold by a Walmart Marketplace seller; returns go to the seller under the seller's returns policy.
$113.76Free shippingChecked Nov 9
Visit Walmart

What reviewers say

Owners generally rate this set as a solid value for occasional and regular joinery work, praising clean flat-bottomed cuts and durable teeth. Some report tear-out on veneered plywood and note that fine width adjustments need shims they supply themselves.

What people mention

Cut qualityPraisedOwners say grooves come out flat and clean in softwood and plywood.
DurabilityPraisedUsers report the carbide teeth hold up well over repeated cuts.
Tear-outCriticisedSome owners see chipping on veneered plywood, especially cross-grain.
ShimsCriticisedBuyers note no shims are included, so odd widths need extra shims.
SetupMixedStacking chippers is straightforward, but keeping them in order and matched takes care.

About the Diablo 8 in. Dia. X 5/8 in. Carbide Stacked Dado Saw Blade Set

This is a stacked dado saw blade set with carbide teeth. It has an 8 in. diameter and a 5/8 in. arbor size.

The blade has 12 teeth and is sold as a 1-pack.

Brand: Diablo
Diameter: 8 in.
Arbor size: 5/8 in.
Teeth: 12
Tooth material: Carbide
Blade type: Stacked dado saw blade set
Pack size: 1

Specifications

color: MulticolorSource

Questions and answers

What widths can this dado set cut?: Stacking the two outer blades and the chippers gives grooves from roughly 1/4 in. to 13/16 in. wide. Odd widths between chipper sizes need shims.
Will it fit my table saw?: It mounts on a standard 5/8 in. arbor, which covers most 8 in. and 10 in. table saws. Check your saw's arbor length and dado capacity first.
Does it cut flat-bottomed grooves?: Yes. The stacked chippers produce flat-bottomed dadoes and rabbets, not the rounded grooves a router bit leaves.
Can it cut plywood without chipping?: It handles plywood, but some owners report tear-out on veneered faces. A backing board or scoring pass helps.
Are shims included?: No. The set does not include shims, so plan on buying a shim set for widths between chipper sizes.
Is it worth it over a premium dado set?: For occasional joinery it covers the common widths at a lower cost. Premium sets add more teeth, shims and finer finish for demanding work.
Where is the Diablo 8 in. Dia. X 5/8 in. Carbide Stacked Dado Saw Blade Set cheapest?: At Walmart, for $113.76, as of our latest check.
What do buyers say about the Diablo 8 in. Dia. X 5/8 in. Carbide Stacked Dado Saw Blade Set?: Rated 3.8 out of 5 from 4 ratings.