

This is a handheld EMF meter that reads electromagnetic field strength on a 3-1/2 digit backlit LCD, covering a 5Hz to 3500MHz bandwidth with a sampling time of about 0.4 seconds. It shows two readings at once, has a hold key to lock a value, and flags unsafe levels on screen. It runs on a 9V battery (not included) and weighs 146g, so it fits in one hand for spot checks around appliances, wiring and electronics. It is a basic single-axis-style tester rather than a calibrated professional instrument, so treat its numbers as a rough guide, not a lab measurement.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
Rated highly by buyers, who mostly describe it as simple to use and useful for quick checks around the home. Complaints center on the missing battery and on readings that are hard to interpret without a reference.
The detector is a handheld EMF meter that reads electromagnetic field radiation and shows the reading on a 3-1/2 digit LCD screen with a backlight, so it can be read in ordinary light or in dim conditions. It measures across a test bandwidth of 5 Hz to 3500 MHz and takes a sample about every 0.4 seconds. It runs in dual test mode.
One key locks the radiation value on the screen so you can record the reading. The meter also indicates whether the current radiation is at a safe level, and the LCD shows "1" when the reading overloads. It measures 63.6 x 31 x 125.8 mm and weighs 146 g, and is made for one-handed operation and for moving around or measuring on site.
It runs on a working voltage of 9V from a 6F22 9V battery, which is not included. Operating temperature is 0 °C to 50 °C, at relative humidity below 80%.
It checks today's price at every store, compares the alternatives and answers in about a minute.