Black FridayDealsBuying guidesBrandsStoresTermsPrivacydeal.ai apps

© Deal.ai Inc.

Deal.ai
D
DIN Rail Clip

DIN Rail Clip

Best price now

$9.00at ODrive Robotics WorldwideObserved at 7:19 AM

25% under what the other stores charge

Compared across 3 stores. Prices are checked against each store and labelled with when.

Visit ODrive Robotics Worldwide

Ask our shopping agent

Enter to send, Shift+Enter for a new line

Our take on the DIN Rail Clip

This is an extruded aluminum DIN rail mounting kit for ODrive motor controllers, sold under SKU ACC-0004. It includes a spring clip, a mounting bracket and two M4 6mm screws, and clamps onto standard 35 mm DIN rail. The bracket weighs 77 g with the bracket and 43 g without it, and the kit is rated to 56 kg per unit. Its best new price is $9.00 at ODrive Robotics Worldwide as of November 4, 2026, with three stores listing it new.

Best forPanel builders mounting ODrive controllers in cabinetsUsers of 35 mm DIN rail setupsEnclosure builds that need a heat spreader plateMakers who want a bolt-on bracket rather than a printed one
Pros
  • Clips onto standard 35 mm DIN rail
  • Extruded aluminum bracket, rated to 56 kg per unit
  • M4 points fit the full enclosure or a bare heat spreader
  • M3 holes fit a heat spreader with heatsink
  • Ships with spring clip, bracket and two M4 screws
  • CAD files published for fit checks
Cons
  • Fits ODrive controllers only, not general hardware
  • S1 plus heatsink needs very long standoffs to clear top components
  • Only two M4 screws included
  • Small part, so shipping can outweigh the price

DIN Rail Clip prices at every store

  • ODrive Robotics WorldwideNew

    In stockReturn policy

    $9.00Observed at 7:19 AM
    Visit store
  • WalmartNew

    In stockSold by Tasharina Corp

    $11.99Free shippingObserved at 7:19 AM
    Visit store
  • Lowe'sNew

    Availability unknown

    $17.49+ $5.99 shippingObserved at 7:19 AM
    Visit store

DIN Rail Clip price history

Lowest price we've seen: $11.99 on Nov 4 at Walmart. Tracked across 2 stores since Nov 4.

From ODrive Robotics Worldwide

  • Mount your ODrive on a DIN rail with this kit
  • Comes with spring clip, mounting bracket and 2x M4 6mm philips screws
  • Use the M4 mounting points for the full enclosure or a heat spreader plate without a heatsink
  • Use the M3 mounting holes to attach to a heat spreader plate with a heatsink
  • CAD files available (note the multiple tabs)
  • Weight with bracket: 77g; without bracket: 43g
Sizing
The combination ODrive S1 + Heatsink + DIN rail clip requires very long standoffs to clear the top side components of the S1.
Shipping
Ships from the Netherlands; shipping calculated at checkout.
In the box
Spring clip, Mounting bracket, 2x M4 6mm philips screws

About the DIN Rail Clip

Mount your ODrive on a DIN rail with this kit.

Comes with spring clip, mounting bracket and 2x M4 6mm philips screws.

Use the M4 mounting points for the full enclosure or a heat spreader plate without a heatsink. Use the M3 mounting holes to attach to a heat spreader plate with a heatsink.

The combination ODrive S1 + Heatsink + DIN rail clip require very long standoffs to clear the top side components of the S1.

CAD files - note the multiple tabs

Weight with bracket: 77g

Weight without bracket: 43g

SKU: ACC-0004

Specifications

Material
Aluminum (Extruded)Source
Shipping Weight
0.09 lbs (0.04 kg)Source
Packaging Type
bagSource
Length
75mmSource
Width
8mmSource
Height
51mmSource
Dimensions
75 x 8 x 51.36mmSource
Maximum Weight Capacity
56 kg per unitSource
For Use With
35 mm DIN RailSource

Questions and answers

Is the DIN rail clip worth it?
If your ODrive lives in a control cabinet on 35 mm rail, yes. At $9.00 at ODrive Robotics Worldwide as of November 4, 2026, it is cheaper than printing or fabricating a bracket and it comes with the spring clip and screws.
Will it fit my ODrive model?
It mounts to the M4 points on the full enclosure or a heat spreader without a heatsink, and to the M3 holes on a heat spreader with a heatsink. Check the published CAD files for your exact board and enclosure combination.
Does it work with the ODrive S1 and heatsink?
Yes, but the S1 with heatsink and this clip needs very long standoffs to clear the components on the top of the board. Plan for those standoffs before you buy.
What rail does it use?
It fits standard 35 mm DIN rail. The bracket is 75 mm long, 8 mm wide and about 51 mm tall.
What is in the box?
A spring clip, a mounting bracket and two M4 6mm Phillips screws. Nothing else is included.
When is it cheapest?
The best new price seen is $9.00 at ODrive Robotics Worldwide as of November 4, 2026. Three stores list it new, so compare them before ordering, since shipping on a small part can change the total.
Where is the DIN Rail Clip cheapest?
At ODrive Robotics Worldwide, for $9.00, 25% under what the other stores charge, as of our latest check.
Where can I buy the DIN Rail Clip?
3 stores we checked sell it, including ODrive Robotics Worldwide, Walmart, Lowe's.

Shoppers also compared

  • G
    Graber and Bali Mounting Bracket for Cordless and Smart Pull Roller Shades
    Graber and Bali Mounting Bracket for Cordless and Smart Pull Roller Shades
  • G
    Graber and Bali Mounting Bracket for Cordless or Smart Pull Roller Shades With a Cassette
    Graber and Bali Mounting Bracket for Cordless or Smart Pull Roller Shades With a Cassette
  • E
    EZ Loader Spring Hanger Bracket 250-015522-10
    EZ Loader Spring Hanger Bracket 250-015522-10
  • O
    OMP Racing OMP Mitsubishi Eclipse Driver Bracket
    OMP Racing OMP Mitsubishi Eclipse Driver Bracket
  • J
    JMF Radiator Brackets for 2G DSM
    JMF Radiator Brackets for 2G DSM
  • S
    Spring Hanger Welded Galvanized Bracket for 2" Frame 250-024766-10
    Spring Hanger Welded Galvanized Bracket for 2" Frame 250-024766-10
  • J
    JMF Coil Pack Bracket for 1G/2G DSM
    JMF Coil Pack Bracket for 1G/2G DSM
  • C
    CRS Universal Mounting Bracket
    CRS Universal Mounting Bracket