This is a 100 ft (30 m) hardwire LED neon rope light with RGBW color, for indoor or outdoor use. It is a flexible, double-sided light with 108 LEDs per meter. The PVC tube is rated IP65 for water resistance, and the plug is UL-certified.
The light is soft and bendable, so it can be shaped into letters, logos or other designs. It can be cut to custom lengths every 3 ft (1 m). Cut only along the cutting marks, or the LEDs may be damaged. Several strips can be joined with a controller and power adapters, splice connectors, U-channels and self-locking zip ties. When two rope sections are joined at the connector, the joint must be sealed with glue.
An included RF remote or a smartphone app controls the light. Both give a choice of 16 colors, stepless brightness from 1% to 100%, four modes (Solid, Flash, Strobe, Fade) and timer settings. The app also has a music sync mode that makes the light pulse with the beat. The actual colors of the strip may differ slightly from the color buttons on the remote.
- Tube length
- 98.42 ft (30 m)
- Cross-section
- 5/16" x 11/16" (8 x 18 mm)
- Net weight
- 12.1 lbs
- Power cord
- 2 ft (60 cm)
- Power
- 110V-120V AC, 9 W/m
- LED density
- 108 LEDs per meter
- Color temperature
- 3000 K, 6500 K, 625 to 740 nm, 440 to 475 nm, 492 to 577 nm, 360 to 380 nm, 380 to 420 nm, 590 to 610 nm
- Luminous flux
- 12 to 14 lm per LED
- Beam angle
- 120 degrees
- LED lifespan
- 50,000 hrs
- Material
- PVC
- Waterproof rating
- IP65
- Cut length
- Every 3 ft (1 m)
- Control
- RF remote (included) and smartphone app
- Modes
- Solid, Flash, Strobe, Fade, music sync (via app)
- Brightness
- 1% to 100%
- In the box
- 1 x 100 ft neon light strip, 40 x mounting clips, 1 x remote control, 2 x end caps, 1 x manual