The DJI Matrice 30T (M30T) is an enterprise drone that pairs thermal imaging with advanced flight technology. It is built for industrial inspections, emergency response, and infrastructure management. A foldable airframe carries wide, zoom, and thermal cameras along with a laser rangefinder.
The airframe is rated IP55 and operates from -20°C to 50°C. Dual-vision and ToF obstacle sensors cover all six sides, and an ADS-B receiver alerts the pilot to nearby crewed aircraft. The OcuSync 3 Enterprise transmission system uses 4 antennas and provides triple 1080p video feeds.
The TB30 batteries are hot-swappable and self-heating, and are rated for 400 cycles. The BS30 battery station charges 4 pairs of batteries and 1 RC set. The DJI RC Plus controller has a 7-inch touchscreen and a dual control mode. It runs DJI Pilot 2, and FlightHub 2 cloud sync supports real-time annotations, terrain maps, and team streaming.
- Max flight time
- 41 minutes
- Max speed
- 23 m/s (about 83 km/h)
- Wind resistance
- 15 m/s
- Service ceiling
- 7000 m
- Operating temp
- -20°C to 50°C
- IP rating
- IP55 (aircraft), IP54 (RC Plus)
- Obstacle sensing
- Dual-vision and ToF sensors in 6 directions
- Transmission
- OcuSync 3 Enterprise, 4 antennas
- Video feed
- Triple 1080p channels
- Payload
- Wide camera, zoom camera, thermal (IR) camera, laser rangefinder
- Flight safety
- ADS-B receiver
- Battery
- TB30 Intelligent Battery; hot-swappable, self-heating, 400 cycles
- Battery station
- BS30: charges 4 pairs of batteries + 1 RC set; 30-minute fast top-up
- Controller
- DJI RC Plus, 7-inch touchscreen, dual control mode
- Software
- DJI Pilot 2, FlightHub 2
- In the box
- 1 x DJI Matrice 30T, 2 x TB30 Flight Battery, 1 x BS30 Battery Station, 1 x DJI RC Plus, DJI Pilot 2