The DJI Mic Mini 2 is a wireless microphone system. This set includes two transmitters, a camera receiver, a mobile receiver and a charging case.
The transmitters and the receiver connect wirelessly using GFSK 2Mbps and also support Bluetooth 5.3. The receiver can connect to a camera with a 3.5 mm TRS camera audio cable. The charging case charges two transmitters and one receiver at the same time. A fully charged case recharges them fully about 3.6 times.
- In the box
- 2 transmitters (DMMT02), 1 camera receiver (DMMR01), 1 mobile receiver (DMMR02), 1 charging case (DMMC02)
- Wireless mode
- GFSK 2Mbps, 2.400-2.4835 GHz, EIRP under 20 dBm
- Bluetooth
- Bluetooth 5.3, 2.400-2.4835 GHz, transmitter power (EIRP) under 20 dBm
- Transmitter size
- 28.58 × 28.04 × 13.52 mm (L × W × H)
- Transmitter weight
- Approx. 11 g (without magnetic clip and magnet)
- Transmitter battery
- Lithium-ion, 114 mAh, 0.45 Wh, 3.87 V
- Transmitter charging
- Max. 5 V, approx. 70 minutes, 5° to 45° C
- Transmitter runtime
- Approx. 11.5 hours
- Transmitter operating temp.
- -10° to 45° C
- Receiver size
- 46.50 × 29.61 × 19.32 mm (L × W × H)
- Receiver weight
- Approx. 17.8 g (including interface cover)
- Receiver battery
- Lithium-ion, 170 mAh, 0.66 Wh, 3.87 V
- Receiver charging
- Max. 5 V, approx. 100 minutes, 5° to 45° C
- Receiver runtime
- Approx. 10.5 hours
- Receiver operating temp.
- -10° to 45° C
- Mobile receiver size
- 39.26 × 27.26 × 8.97 mm (L × W × H)
- Mobile receiver weight
- Approx. 6.5 g
- Mobile receiver temp.
- Charging 5° to 45° C; operating -10° to 45° C
- Case size
- 106.30 × 42.50 × 59.20 mm (L × W × H)
- Case weight
- Approx. 159.3 g (case only)
- Case battery
- Lithium-ion, 1950 mAh, 7.55 Wh, 3.87 V
- Case charging
- Max. 5 V, 3 A, approx. 2 hours, 5° to 40° C
- Case operating temp.
- 5° to 45° C
- Runtime test
- Measured with 2 TX + 1 RX, noise cancellation off, close-range recording without interference, transmitter linked to receiver, receiver connected to a camera by a 3.5 mm TRS cable