Dodge Car Key Programmer Tool/Bluetooth/12+8 Cable Adapter and Keyless Entry Remote Replacement for 2018 Durango with FCC: M3N-40821302

**Worry about programming? Need a new keyless remote? ** Our OBD uses state-of-the-art technology and is the first tool on the market capable of programming smart keys. You just program it at home, take 5-10 min, and get a new key without paying expensive fees. Paired with keys to give you more peace of mind. NOTE: 1. Before you buy it, Please make sure that your original FCC, chip and Buttons are the same as our product in case of money lose. 2. You must have one working remote to program the key(as to start the ignition) 3. No need to cut emergency key blade to program. 4. Keep working remotes away from car before programming. 5. Read pin code firstly and record it for later use. 6. Press and release the unlock button twice, repeat this operation until the key programming is completed. 7. 2018+Dodge needs a 12+8 cable adapter to connect the programmer and vehicle This remote is replacememnt for FCC ID: M3N-40821302 CHIP:46 Frequency: 433MHZ Compatibility: For 2018 DURANGO Disclaimer: Remote2program OBD is only used by car owners to program their own vehicles, and other actions are not affiliated with Remote2program