The Donner DP-1 is a 10-output power supply for guitar pedalboards. Each output is isolated, so one noisy or faulty pedal is less likely to bleed hum into the others. It includes an 18V output for pedals that need higher voltage, and a switch lets you turn the LED indicators off. It suits players with a board of several pedals who want clean, separate power without a large brick. Compared with smaller daisy-chain supplies it isolates every output; compared with premium isolated supplies it is simpler and has fewer voltage options. Owners rate it highly and mostly praise the low noise and easy setup.
In stockShips from Hong Kong SAR China · duties may applyReturn policy
Owners rate the DP-1 highly and most say it quiets their board compared with daisy-chaining. Setup is described as simple and the isolated outputs are the main selling point. A minority report hum or noise with particular pedals.
The Donner DP-1 is a 10-output power supply for effect pedals. It powers pedals that run on 9V, 12V or 18V. Each output has its own voltage regulator circuit, so the outputs are independent of one another.
All 10 outputs have separate short-circuit protection. A short in one channel does not affect the others. With the LED lights on, the light of the shorted channel goes off while the other channels stay lit, which helps locate the fault when several pedals are connected.
A switch controls the LED lights. Turn it toward the LEDs and all the lights normally come on once power is connected. Turn it back if you don't want them lit. The housing is aluminum alloy. Check the positive and negative polarity before wiring, because incorrect polarity can damage the unit.