

The Double H Dylan is a 12-inch pull-on western work boot with a steel safety toe rated I-75/C-75 and an electrical hazard rating. Its full-grain leather upper, leather lining and six-row stitch pattern give it a traditional western look, while a Permafresh cushioned insole and a removable polyurethane insert add comfort. The oil- and slip-resisting I.C.E. outsole is built for abrasion resistance on hard job sites. It suits ranch and construction workers who want a tall, lace-free boot made in the USA with global parts. Rivals in this class often use cemented rubber soles and thinner insoles; the Dylan's removable insert lets you swap in your own orthotic.
In stockReturn policy
Owners of Double H western work boots generally praise the leather quality and long wear, and the Dylan follows that pattern. The steel toe and cushioned insole draw positive comments for all-day job-site use. Some note the tall shaft and stiff leather need a break-in period.
The Dylan is a men's 12-inch western work boot with a steel safety toe and a pull-on shaft. The upper is full-grain Old Town Folklore leather, and the lining is leather. The shaft has a six-row stitch pattern, the R toe is tapered but rounded at the tip, and the heel is 1 7/8 inches.
The steel safety toe meets or exceeds ASTM standards for compression and impact at I-75/C-75. The boot is electrical hazard rated and is tested to withstand 18,000 volts at 60 Hz for one minute without leakage. A Permafresh cushioned insole with an anti-bacterial treatment sits under a removable Midnight shock-absorbing polyurethane insert. The insert lifts out for your own orthotic.
The Oak I.C.E. outsole is made of Industrial Compressed Elastomer and is oil- and slip-resisting. It is designed with abrasion resistance. The boot is made in the USA with global parts at Double H's Martinsburg, Pennsylvania factory by UFCW Local 1776 Keystone State.
It checks today's price at every store, compares the alternatives and answers in about a minute.








