Will these bits fit my rotary tool?

They fit any Dremel rotary tool and any rotary tool that accepts a 1/8-inch collet. Check that your tool's collet is 1/8 inch before buying.

What materials can I carve with this set?

Dremel lists soft metals, plastics and woods, on flat and curved surfaces. Hardwoods and steel are not recommended for these bits.

What is the difference between the three bits?

The 125 is a 1/4-inch carving bit, the 191 is 1/8 inch and the 115 is 5/16 inch. The different shapes suit roughing, detail work and grooving.

Is this a good set for a beginner?

Yes. Three bits cover the basic carving shapes and let you try the work before buying a larger set. Expect to add bits for bigger or harder projects.

Does it come with a case?

No. The kit is the three bits only, so you will need your own storage.

Can I use these for engraving metal?

They are intended for soft metals. Harder metals will dull the bits quickly.

Dremel 750-WM Carving & Engraving Rotary Tool Accessory Starter Kit

Best price now

$12.96at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Dremel 750-WM Carving & Engraving Rotary Tool Accessory Starter Kit

Best price now

$12.96at WalmartChecked Nov 10

Prices are checked against each store and labelled with when.

Visit Walmart

Ask our agent about this product

It checks today's price at every store, compares the alternatives and answers in about a minute.

Price facts

Last seen at $12.96 at Walmart on Nov 10.

Our take on the Dremel 750-WM Carving & Engraving Rotary Tool Accessory Starter Kit

The Dremel 750-WM is a three-piece set of high-speed steel carving bits for rotary tools: the 125 (1/4 inch), 191 (1/8 inch) and 115 (5/16 inch). All three use a 1/8-inch shank, so they fit any Dremel rotary tool or any rotary tool with a 1/8-inch collet. The bits are shaped for shaping, hollowing, grooving, slotting, inlaying and cutting tapered holes in soft wood, plastic and soft metal. It is a low-cost way to try carving before buying a full bit set, but it covers only three shapes and is not meant for hardwoods or steel.

Best forBeginners trying rotary-tool carvingWood and plastic detailingInlay and groove workOwners of any 1/8-inch collet rotary tool

Pros

Fits every Dremel tool and other 1/8-inch collet rotary tools
Three distinct shapes cover roughing, detail and grooves
Works on soft wood, plastic and soft metal
Small set to test carving before buying more bits

Cons

Only three bits, no storage case
Not suited to hardwoods or steel
Small bits wear faster under heavy use
No depth guide or instructions included

Dremel 750-WM Carving & Engraving Rotary Tool Accessory Starter Kit prices at every store

WalmartNew
In stock
$12.96Checked Nov 10
Visit Walmart

What reviewers say

4.7 / 532 ratings

Buyers rate the set highly and call it a solid, affordable introduction to rotary carving. Most praise the cut quality on soft wood and plastic and the universal 1/8-inch fit. A few note the bits are small and dull sooner on harder materials.

What people mention

Cut qualityPraisedReviewers say the bits cut cleanly in soft wood and plastic.
CompatibilityPraisedOwners report the 1/8-inch shanks fit standard Dremel collets without issue.
ValuePraisedBuyers see it as a low-cost way to start carving.
DurabilityMixedSome say the bits dull faster when used on harder materials.
Bit sizeCriticisedA few find the bits too small for larger carving projects.

About the Dremel 750-WM Carving & Engraving Rotary Tool Accessory Starter Kit

The Dremel 750-WM is a 3-piece starter kit of carving and engraving bits for rotary tools. It turns a Dremel rotary tool into a carving and engraving machine.

The bits are made for shaping, hollowing, grooving, slotting, inlaying and making tapered holes. They work on soft metals, plastics and woods, on both flat and curved surfaces.

The kit is compatible with all Dremel rotary tools and with other rotary tools that use a 1/8" collet.

Brand: Dremel
Model: 750-WM
Shank size: 1/8"
In the box: 1 x 125 1/4" Carving Bit, 1 x 191 1/8" Carving Bit, 1 x 115 5/16" Carving Bit
Piece count: 3
Compatibility: All Dremel rotary tools and rotary tools with a 1/8" collet
Works on: Soft metals, plastics, woods
Uses: Shaping, hollowing, grooving, slotting, inlaying, making tapered holes

Specifications

size: 1/8" ShankSource

Questions and answers

Will these bits fit my rotary tool?: They fit any Dremel rotary tool and any rotary tool that accepts a 1/8-inch collet. Check that your tool's collet is 1/8 inch before buying.
What materials can I carve with this set?: Dremel lists soft metals, plastics and woods, on flat and curved surfaces. Hardwoods and steel are not recommended for these bits.
What is the difference between the three bits?: The 125 is a 1/4-inch carving bit, the 191 is 1/8 inch and the 115 is 5/16 inch. The different shapes suit roughing, detail work and grooving.
Is this a good set for a beginner?: Yes. Three bits cover the basic carving shapes and let you try the work before buying a larger set. Expect to add bits for bigger or harder projects.
Does it come with a case?: No. The kit is the three bits only, so you will need your own storage.
Can I use these for engraving metal?: They are intended for soft metals. Harder metals will dull the bits quickly.
Where is the Dremel 750-WM Carving & Engraving Rotary Tool Accessory Starter Kit cheapest?: At Walmart, for $12.96, as of our latest check.
What do buyers say about the Dremel 750-WM Carving & Engraving Rotary Tool Accessory Starter Kit?: Rated 4.7 out of 5 from 32 ratings.