This is a loaded subwoofer enclosure from DS18 with one 12-inch ZXI12.2D subwoofer. The front-ported box is tuned to 29Hz. It is built from ¾-inch MDF and finished in black bed liner paint.
The subwoofer handles 1000W RMS and 2000W peak power. Its frequency response runs from 15Hz to 600Hz, with a sensitivity of 92 dB. The recommended low-pass crossover is 60Hz.
The subwoofer has a 3-inch voice coil, a foam surround, an aluminum basket and a ferrite magnet. The enclosure has a 79L (2.8 ft³) internal volume and a -3dB dropping point of 24Hz.
- Speaker
- 1 x 12" ZXI12.2D subwoofer
- RMS power
- 1000W
- Peak power
- 2000W
- Impedance
- 1 Ohm total
- Load
- Parallel (Dual 2 Ohm)
- Sensitivity
- 92 dB (1W/1m)
- Frequency response
- 15Hz – 600Hz
- Low-pass crossover
- 60Hz recommended
- Voice coil
- 3" / 76.5 mm diameter; black aluminum former; CCAW winding
- Cone
- Non-pressed paper
- Dust cap
- PPI
- Surround
- Foam
- Basket
- Aluminum
- Magnet
- Ferrite, 224 oz (4 × 56 oz)
- Box type
- Front ported
- Port tune
- 29Hz
- Port size
- 1.96" × 13" × 23.2" (W × H × length)
- Internal volume
- 79L / 2.8 ft³
- -3dB point
- 24Hz
- Box material
- ¾" / 19 mm MDF
- Finish
- Black bed liner paint
- Height
- 14.5" / 368 mm
- Width
- 23.15" / 588 mm
- Depth
- 17.72" / 450 mm (depth 1); 19.7" / 500 mm (depth 2)
- Model
- ZXI-112LD.RG