
DS18 12" Loaded Ported Armored 1000 Watts Subwoofer Enclosure ZXI-112LD.RG
Best price now
Prices are checked against each store and labelled with when.

Prices are checked against each store and labelled with when.
This is a loaded, front-ported 12-inch subwoofer enclosure built around DS18's ZXI-12.2D dual 2-ohm driver. The cabinet is 3/4-inch MDF finished in black bed liner, with a port tuned to move a lot of air and a 1000W RMS power rating. It suits someone who wants a single-box bass upgrade for a truck or SUV and has an amp that can feed a dual 2-ohm load. Against bare enclosures and cheaper loaded boxes, it trades a rugged, resonance-damped cabinet and high 92 dB sensitivity for a heavy, bulky box that needs real power to shine.
In stockReturn policy
The ZXI-112LD.RG is a loaded, front-ported subwoofer enclosure with a 12-inch ZXI-12.2D subwoofer. The enclosure is made of 3/4-inch (19 mm) MDF and finished in black bed liner. Its front port measures 1.96 by 13 by 23.2 inches, and the internal volume is 79 L / 2.8 ft3 with a 29 Hz port tune.
The subwoofer has a dual 2-ohm configuration wired in parallel for a total impedance of 1 ohm. It handles 1000 W RMS and 2000 W max power, with 92 dB sensitivity and a frequency response of 15 Hz to 600 Hz. The recommended low-pass crossover is 60 Hz, and the -3 dB dropping point is 24 Hz.
Speaker construction includes a non-pressed paper cone, PPI dust cap, foam surround, aluminum basket, and ferrite magnet. The magnet weighs 224 oz (4 x 56 oz). The enclosure measures 14.5 inches high and 23.15 inches wide, with a depth of 17.72 inches at Depth 1 and 19.7 inches at Depth 2.
It checks today's price at every store, compares the alternatives and answers in about a minute.





