The DS18 GEN-X112LD is a prefabricated, front-ported enclosure that comes loaded with a 12-inch GEN-X124D subwoofer. It is pre-wired to a 2 ohm final load and handles up to 900W max and 450W RMS. No box building is needed. You add an amplifier and wiring.
The enclosure is built from 1/2" MDF with a vinyl finish. It has 1.5 cubic feet (45.3 L) of internal volume and is tuned to 35Hz. The subwoofer is a high-excursion model with a ferrite magnet.
- Subwoofer
- 1 x 12" GEN-X124D
- Impedance
- 2 ohm total (parallel load configuration)
- RMS power
- 450W total
- Max power
- 900W total
- Sensitivity
- 91dB (1W/1m)
- Frequency response
- 29 - 250Hz
- Low-pass crossover
- 120Hz recommended
- Box type
- Front ported
- Port tuning
- Fb 35Hz
- -3dB point
- F3 29Hz
- Internal volume
- 1.5 cubic feet / 45.3L
- Box material
- 1/2" MDF
- Finish
- Vinyl
- Voice coil
- 2" diameter, black aluminum former, SV winding
- Cone
- Paper and fiberglass
- Dust cap
- PPI
- Surround
- Foam
- Basket
- Steel
- Magnet
- Ferrite
- Dimensions
- Height 13.78" (350mm); Width 19.68" (500mm); Depth 1: 11" (280mm); Depth 2: 14" (356mm)
- In the box
- 1 x GEN-X112LD loaded enclosure