This milky white DTF transfer powder is a hot-melt adhesive powder for direct-to-film printing. It is made to help prevent pinholes and give smooth, high-resolution prints. Printed transfers are waterproof, stretchy and soft to the touch, and resist scratching and yellowing.
It works with DTF and sublimation printers. It can be used on a wide range of fabrics and colors, including 100% cotton, silk, polyester and leather. Unopened or stored in a cool, dry place, it keeps for up to 24 months.
To use it, print the design on film, then apply the powder by hand or with an automated shaker and lightly shake off the excess. Melt the powder in an oven or a heat press. Pre-press the garment, press the film onto it, let it cool and peel the film slowly and steadily. Then re-press the garment for added durability.
- Type
- DTF transfer powder, milky white
- Compatibility
- DTF printers and sublimation printers
- Fabrics
- 100% cotton, silk, polyester, leather and more
- Shelf life
- Up to 24 months in a cool, dry place
- Application
- By hand or with an automated shaker
- Melt: oven
- 280°F for 6 minutes, until the powder looks glossy
- Melt: heat press
- 325°F for 5-7 minutes with the press open, film powder side up, 4-7 mm below the platen
- Pre-press
- 2-5 seconds
- Transfer press
- 325°F for 8-15 seconds, film covered with silicone or parchment paper
- Re-press
- 325°F for 5-8 seconds