
DTF Transfer Sheet - Mechanical #6
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $5.00 at The Vinyl Lobby (checked Nov 19, 2026).

Prices are checked against each store and labelled with when.
This is a single DTF (direct-to-film) transfer sheet with a mechanical-themed design, meant to be heat-pressed onto T-shirts and other fabrics. It works with a heat press at 160°C for 90 seconds, or with a home iron set to cotton (130–150°C) and no steam, followed by a cool peel and a short finishing press. It suits crafters and small print shops who want a printed graphic without screen setup or a vinyl cutter. Compared with vinyl or sublimation, DTF transfers bond to cotton and blends and keep fine detail, but the result depends on steady pressure and temperature, and the sheet is a one-off design rather than a reusable tool.
In stockShips from Australia · duties may applyReturn policy
The DTF Transfer Sheet is a heat-applied transfer for fabric. It can be applied with a heat press or a home iron.
With a heat press, press the sheet at 160°C for 90 seconds, let it cool for 90 seconds, then peel the DTF PET film. Place a DTF Finishing Sheet (baking paper) over the transfer and press again at 160°C for 10 seconds.
With a home iron, protect the surface with a heat mat or towel and iron the fabric for 5 seconds. Place the transfer, turn off steam, empty the iron's water, set the iron to cotton at 130–150°C, and iron with firm pressure for 10–15 seconds. Let it cool and slowly peel off the clear film; repeat the ironing if the transfer is not fully adhered.
It checks today's price at every store, compares the alternatives and answers in about a minute.