
DTF Transfer Sheet - Talks Back
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $5.00 at The Vinyl Lobby (checked Nov 19, 2026).

Prices are checked against each store and labelled with when.
This is a DTF (direct-to-film) transfer sheet, a printed PET film you press onto fabric to add a design. It works with a heat press at 160°C for 90 seconds, a 90-second cool, a peel, then a second 10-second press under a finishing sheet, or with a home iron at 130–150°C and firm pressure. It suits crafters and small shirt-makers who want a full-color transfer without a vinyl cutter or weeding. Compared with HTV and screen-print transfers, DTF handles fine detail and many colors in one pass, but it needs a two-step press and careful cooling before the peel.
In stockShips from Australia · duties may applyReturn policy
This is a DTF transfer sheet, a film-backed image that is pressed onto fabric with a heat press or a home iron to transfer the design.
With a heat press, the sheet is pressed at 160 °C for 90 seconds. It is then left to cool for 90 seconds before the DTF PET film is peeled away to reveal the transfer. A DTF finishing sheet (baking paper) is placed over the transfer and pressed again at 160 °C for 10 seconds to finish.
With a home iron, the surface being ironed on is first protected with a heat mat or towel, and the fabric is ironed for 5 seconds. The transfer is placed in position and ironed with firm pressure for 10–15 seconds on the cotton setting at 130–150 °C, with the steam function off and the water emptied from the iron. Once the transfer is cool, the clear film is slowly peeled off; if it is not fully adhered, the pressing step is repeated.
It checks today's price at every store, compares the alternatives and answers in about a minute.