This is a loaded subwoofer enclosure with two 12" DS18 GEN-X124D subwoofers already mounted in a front-ported box. The box is tuned to 35Hz and has an internal volume of 3.2 cubic feet (90.6 L). You don't need to build a box to spec. An amplifier is needed to drive the subwoofers.
The enclosure is made from 1/2" MDF with a vinyl finish. Each GEN-X124D is a high-excursion subwoofer with a ferrite magnet, a steel basket and a 2" 4-layer voice coil in a 4+4 configuration. The subwoofers are wired in parallel.
- Subwoofers
- 2 x 12" DS18 GEN-X124D
- RMS power
- 450W each, 900W total
- Max power
- 900W each, 1800W total
- Impedance
- 2 + 2 Ohms (individual subwoofer connector)
- Load
- Parallel
- Sensitivity
- 87.5dB per subwoofer; 94dB total (1W/1m)
- Frequency response
- 29 - 250Hz
- -3dB point
- 29Hz
- Crossover
- Recommended low-pass at 120Hz
- Voice coil
- 2" diameter, 4-layer, black aluminum former
- Cone
- Paper and fiberglass
- Dust cap
- PPI
- Surround
- Foam
- Basket
- Steel
- Magnet
- Ferrite
- Box type
- Front ported
- Port tuning
- 35Hz
- Internal volume
- 3.2 cu ft (90.6 L)
- Box material
- 1/2" MDF
- Finish
- Vinyl
- Height
- 13.78" (350 mm)
- Width
- 38.58" (980 mm)
- Depth
- 11" (280 mm) and 14" (356 mm)