The Dual Battery Isolator Kit is a 12V, 140 AMP voltage sensitive relay for dual battery systems. It combines automatic and manual modes, and an LED display shows voltage from 5V to 20V. The VSR cuts in at 13.3 volts and cuts out at 12.7 volts to keep the primary battery charged and ready to start the vehicle.
Cut-in and cut-out voltage can be set from 11.0V to 14.0V for different battery types. A delay setting prevents frequent switching; delay time is adjustable from 3 to 60 seconds, with 15 seconds recommended. If input voltage is lower than 11V or higher than 17V, the circuit disconnects automatically to protect the main battery from over-discharging.
The casing is sealed with silicone and has an IP65 waterproof rating for dusty, wet and unpredictable environments. It is designed for 12V dual battery systems, including lithium batteries, and allows two power sources to charge from one alternator. The kit includes installation accessories and is intended for camper vans, trucks, caravans, RVs, ATVs, UTVs, boats and camping applications.
- System Voltage
- 12V
- Amperage
- 140 AMP
- Modes
- Automatic and manual
- Voltage Display
- LED, 5V-20V
- Cut-In Voltage
- 13.3 volts
- Cut-Out Voltage
- 12.7 volts
- Voltage Setting
- 11.0V-14.0V
- Low Voltage Cutoff
- Lower than 11V
- High Voltage Cutoff
- More than 17V
- Delay Time
- 3-60s
- Recommended Delay
- 15s
- Waterproof Rating
- IP65
- Construction
- Casing with silicone seal
- Battery Compatibility
- Lithium batteries
- Alternator Charging
- Two power sources from one alternator
- Applications
- Camper vans, trucks, caravans, RVs, ATVs, UTVs, boats, camping
- In the Box
- Installation accessories