
Durston 1200 Table Top Draw Bench
Best price now
Prices are checked against each store and labelled with when.
Finding cheaper alternatives
Price facts
- Lowest price today: $846.23 at Otto Frei (checked Nov 19, 2026).

Prices are checked against each store and labelled with when.
The Durston 1200 is a compact draw bench that clamps or bolts to the edge of a table so jewelers and metalsmiths can pull wire through draw plate holes with a geared handle instead of by hand. It draws continuous wire up to 24 inches (600 mm) long and uses a 4-to-1 gearbox reduction for steady, controlled pulls. Its extruded steel frame is built to take repeated drawing loads, and it hangs on a wall or stores away when not in use. It suits small shops and bench jewelers short on floor space who still want a dedicated draw bench rather than hand pulling or a full standing unit.
In stockReturn policy
The Durston 1200 is a table-top draw bench for pulling wire down through the holes of a draw plate. It mounts at the edge of a table or workbench, so wire drawing becomes a controlled bench operation without the floor space a full standing bench takes up.
The bench holds a continuous piece of wire up to 24" (600 mm) long and is built from extruded steel. A 4-to-1 gearbox reduction keeps the draw controlled and consistent. German-made draw tongs come with it.
Two mounting holes at each end allow permanent installation. For temporary use, L-clamps fit through the holes on the side. The unit can be hung on a wall or stored away when the work is done. The handle needs clear space to swing through its full travel, so the mounting position at the bench edge should be planned before drilling.
It checks today's price at every store, compares the alternatives and answers in about a minute.