The Rockville DV12K51 is a pair of 12-inch K5 Series car subwoofers that come pre-loaded in a vented enclosure. The wired final impedance is 1 ohm. Peak power handling is 2800 watts, with 700 watts continuous RMS.
The enclosure is made of ¾" MDF that is bonded, stapled and braced. It has computer-designed vents, is angled at 15% for bass alignment, and is covered in aviation grade tweed carpet. Speaker wire connects through Satin Nickel push terminals. Each sub has 1.82 cu ft of air space, and the enclosure is tuned to 35 Hz.
Each subwoofer has a 2" 4-layer black aluminum voice coil wound with OFC (100% copper) wire, a 50 oz magnet and a cast iron basket with a black sanded finish. The cone is fiber-reinforced, non-pressed paper with blue stitching reinforcement. It sits in a thick foam surround and is topped with a polypropylene dustcap. A vented hole in the T-yoke helps dissipate heat. A mounting gasket with Rockville branding helps seal each subwoofer air-tight when mounted.
- Configuration
- Dual 12" subwoofers in a vented enclosure
- Final impedance
- 1 ohm
- Peak power
- 2800 watts
- RMS power
- 700 watts continuous
- Sensitivity
- 88 dB
- Frequency response
- 25 Hz - 1.5K kHz
- Tuning frequency
- 35 Hz
- Enclosure material
- ¾" MDF, bonded, stapled and braced, with tweed carpet
- Enclosure air space
- 1.82 cu ft per sub
- Vent dimensions
- 3" x 9.75" x 9.75"
- Enclosure size
- 32.5" x 17.25" x 16.25"
- Weight
- 62.7 lbs
- Voice coil
- 2" 4-layer black aluminum, OFC copper wire
- Magnet
- 50 oz
- Basket
- Cast iron, black sanded finish
- Cone
- Fiber-reinforced non-pressed paper
- Surround
- Thick foam
- Dustcap
- Polypropylene
- Terminals
- Satin Nickel speaker wire push terminals on the enclosure; gold-plated spring-loaded push terminals on the subs
- Cutout diameter
- 11.02"
- Mounting depth
- 5.03"
- T-yoke and washer
- 6mm T-yoke and 6mm washer
- Gap plate
- Inside diameter 80mm (3.14"); outside diameter 156mm (6.14"); thickness 25mm (0.98")
- Yoke
- Outside diameter 145mm (5.7"); thickness 6mm (0.23"); pole diameter 50mm (2")