The DeWalt DWE7491RS is a 10-inch compact jobsite table saw with a rolling stand. It has a 15 amp brushed motor with a no-load speed of 4,800 RPM. The motor cuts pressure-treated lumber and hardwoods. A redesigned transmission delivers more power to the blade and improves runtime.
A rack and pinion telescoping fence makes adjustments fast, smooth and accurate. The fence rails retract to make a small, portable package. The fence flips over for narrow rip cuts, and a patented material support can also be used for narrow rips. The Site-Pro Modular Guarding System allows tool-free adjustment of the guarding components for each application.
The blade guard assembly, fence, riving knife and push stick store on board when not in use. A 2-1/2 inch dust collection port connects to a vacuum. The rolling stand is designed for easy setup and breakdown, and it makes the saw easier to move around the jobsite.
- Blade
- 10 in. 24-tooth carbide blade, 5/8 in. arbor
- Motor
- 15 amp, 120V, brushed, corded
- No-load speed
- 4,800 RPM
- Rip capacity
- 32-1/2 in. right, 22 in. left
- Depth of cut
- 3-1/8 in. at 90 degrees, 2-1/4 in. at 45 degrees
- Blade tilt
- Left, 0 to 45 degrees
- Dado blade
- Max. 13/16 in. wide, max. 0.81 in. diameter
- Table
- Aluminum, 26-3/8 in. wide x 27-7/8 in. deep (21-7/8 in. x 26-3/8 in. also stated)
- Table width with extension
- 32.5 in.
- Fence
- Rack and pinion, telescoping, 26-3/8 in. long
- Guarding
- Site-Pro Modular Guarding System, blade guard system