
DynoCams Camshaft - 315 Grind - 315-PRED
Best price now
Prices are checked against each store and labelled with when.
Ask our agent about this product
It checks today's price at every store, compares the alternatives and answers in about a minute.

Prices are checked against each store and labelled with when.
It checks today's price at every store, compares the alternatives and answers in about a minute.
The DynoCams 315 is a flat-tappet performance camshaft for the Predator 212cc non-hemi engine, meant for Shredder Level II heads on smaller-displacement OHV builds. It sits one step above DynoCams' 308 grind, adding lift and duration to push top-end power. The welded lobes are built for durability at higher spring pressures. It is a race-oriented part: it requires an upgraded spring package, billet rod and billet flywheel, and it is not a bolt-in upgrade for a stock engine.
In stockReturn policy
The DynoCams 315 Grind camshaft is made for the non-hemi Predator 212cc engine. It is recommended for Shredder Level II heads on smaller displacement engines. The 315 lobe design is a step above the 308, with slightly more lift and increased duration for more top end power in a modified OHV engine.
The lobes are welded for extra durability. This cam requires an upgraded spring package, a billet rod, and a billet flywheel.
This is a flat tappet camshaft, so new lifters are recommended at installation. Break-in is a 20 minute idle at or above 1800 rpm, followed by an oil change. Each lifter should stay with the lobe it broke in with. Use a high zinc/phosphorus (ZDDP) "hotrod" oil rather than a "clean" oil made for roller cams.