

The Eastman E1DL is a left-handed dreadnought built with a solid thermo-cured Sitka spruce top and solid sapele back and sides. The thermo-curing gives the top a played-in, open response closer to a broken-in guitar than a fresh one. Its 1-3/4-inch bone nut and traditional even C neck suit fingerstyle and flatpicking alike, and the hand-scalloped X bracing pushes volume and low-end typical of a good dreadnought. Against laminate-back rivals it offers all-solid woods and a bone nut and saddle, which is unusual at this level.
In stockShips from the UK · duties may applyReturn policy
Owners rate the E1DL very highly, praising its warm, open tone and build quality for the money. Many say it competes with guitars costing far more, though some note the satin finish and lack of a pickup.
The Eastman E1DL is a left-handed dreadnought acoustic guitar with a solid thermo-cured Sitka spruce top and solid sapele back and sides. The body measures 16 inches across and 4-11/16 inches deep. The top and back are bound in tortoise, and the top carries classic rosette inlay and a tortoise shell pickguard.
The neck is mahogany in a traditional even "C" profile, joined to an ebony fingerboard with a 12-inch radius and pearl dot inlays. It has 20 frets, a 25.4-inch scale length and a 1-3/4-inch bone nut. Inside, the top is braced with a hand-scalloped X pattern, and a dual-acting truss rod runs through the neck.
Open-gear PingWell V93N 3+3 tuners and an ebony bridge with a bone saddle hold the strings, spaced 2 5/32 inches at the bridge. The guitar is strung with D'Addario XS coated phosphor bronze light strings (.012 - .053). Action height at the 12th fret is 3/32 inch on the bass side and 2/32 inch on the treble side. It comes with a deluxe padded Eastman gig bag and a 4mm truss rod wrench.
It checks today's price at every store, compares the alternatives and answers in about a minute.








