This is a permanent, washable electrostatic furnace filter for A/C and heating systems, sized 10x10x1. The frame is a single piece of roll-formed galvanized steel, fastened at one corner with a single rivet. Polypropylene media layers build a natural static charge as air passes through, so no electricity is required.
To install it, take out the old disposable filter and drop this one in its place. To clean it, vacuum it off every 30-45 days and wash it with a hose or shower head about every 3 months. You can also blow it out with an air compressor.
The filter has low air resistance. It is especially recommended for replacing small to medium filters (16x25x1 or smaller). For larger filters, higher arrestance filters remove more airborne dust. It carries a lifetime warranty.
- Type
- Furnace filter, permanent and washable
- Filter size
- 10x10x1
- Thickness
- 7/8 inch (1/2 inch and 1-3/4 inch also available; contact the store for more info)
- Frame
- Single piece of roll-formed galvanized steel, one rivet at a corner
- Media
- Polypropylene layers, electrostatic
- Peak arrestance
- 88%
- MERV rating
- 6
- Initial resistance
- 0.085" WG
- Dust holding
- 126 grams
- Airflow rate
- 300 FPM
- End point of test
- 0.50" WG
- Power
- No electricity required